iVMS-4200.exe[122] error language in device not correct

bayensf

n3wb
Jul 25, 2015
7
0
Hi and thanks in advance to whom can help.

I have DS-2D2132F-IS camera that I had updated to V5.3.0. It was Multilingual before and ended up in Chinese....Ok I did a re-install to V5.2.5 141201 and also the Arden procedure to have a selection box at the star-up to have English.
What remains is that the camera is still Chinese for iVMS-4200. This is causing also failures with DNS. Cam cannot be looked at from outside the Network.

Whom knows how to fix it?

Dutch native speaking....
 
Use the downgrader in my signature or the mtd hack this will resolve your language troubles
 
Thanks fot your reply.

I did do a back-up before the Firmware update, could the file be usefull?
And just a question, why do we need to use TFTP? When doing it from the Camera GUI it seems to work. When I did it with the TFTP it worked at the beginning, after a while it did not work anymore (yes I tried a lot of different digicap files).
 
You should only use the one in the downgrader, and because it is a downgrade not an upgrade you can only use the tftp for it to work correctly.