IVS rules are shown on IE11 live view - how to disable permanently?

[Perimeter]

When I start IE11 with a 5442 cam, I am always shown the IVS rules. I know how to turn them off in the bottom of the live view. But this doesn't seem to stick. Next time I start IE11, it is back on.

Is this a feature or is there another setting somewhere? The cam is recording to an NVR over network. Is there a setting in the NVR somewhere, that may be forcing this?

My memory tells me that I had to turn them on every time in the past. Now it is the opposite. Thanks for help.

 

[bigredfish]

On SMartPSS you can turn them off in the menu

On the NVR Go to Display

 

[Perimeter]

On SMartPSS you can turn them off in the menu

On the NVR Go to Display
View attachment 164651 View attachment 164650

I had that setting in the NVR changed back to "off" already. But it doesn't help.
In smartPSS, you are refering to cogwheel top right? That is off too.
I still see the rules when I fire up IE11.

 

[JDreaming]

I had that setting in the NVR changed back to "off" already. But it doesn't help.
In smartPSS, you are refering to cogwheel top right? That is off too.
I still see the rules when I fire up IE11.

I tried to figure out how to disable it permanently but didn't find the solution and just forget about it. It was not a big deal, I was mildly annoyed when it happen to me the first time.

 

[bigredfish]

I had that setting in the NVR changed back to "off" already. But it doesn't help.
In smartPSS, you are refering to cogwheel top right? That is off too.
I still see the rules when I fire up IE11.

Yep. I think that only turns it off within SmartPSS though. ….

 

[kjinxx2]

one of my PTZ cams started doing the same thing and I could not figure out how to turn it off

 

[CCTVCam]

Could be normal. My 4Kt's show the trip wires if I access and view them through the cameras ie interface. I see this as a bonus as it enables me to see what's set up and how they interact with the live picture and objects which is useful.

However, when viewed through a recording or BI, they aren't visible. As you specifically say you see them through IE, it could be the norm give you're not meant to view footage this way.

 

[Perimeter]

Could be normal.

I was thinking that perhaps it depends on the camera model. Because on the 2231S, I had the opposite problem, I always had to turn them on.
I also noted this: In SmartPSS, if you click the "+magnifying glass" on and off, IVS lines comes on and off too in the particular window.