IVS rules are shown on IE11 live view - how to disable permanently?

Perimeter

Getting comfortable
Feb 18, 2023
557
584
Europe
When I start IE11 with a 5442 cam, I am always shown the IVS rules. I know how to turn them off in the bottom of the live view. But this doesn't seem to stick. Next time I start IE11, it is back on.

Is this a feature or is there another setting somewhere? The cam is recording to an NVR over network. Is there a setting in the NVR somewhere, that may be forcing this?

My memory tells me that I had to turn them on every time in the past. Now it is the opposite. Thanks for help.
 
On SMartPSS you can turn them off in the menu

On the NVR Go to Display
Display1.jpg Display2.jpg
 
I had that setting in the NVR changed back to "off" already. But it doesn't help.
In smartPSS, you are refering to cogwheel top right? That is off too.
I still see the rules when I fire up IE11.

I tried to figure out how to disable it permanently but didn't find the solution and just forget about it. It was not a big deal, I was mildly annoyed when it happen to me the first time. :)
 
I had that setting in the NVR changed back to "off" already. But it doesn't help.
In smartPSS, you are refering to cogwheel top right? That is off too.
I still see the rules when I fire up IE11.

Yep. I think that only turns it off within SmartPSS though. ….
 
  • Like
Reactions: JDreaming
Could be normal. My 4Kt's show the trip wires if I access and view them through the cameras ie interface. I see this as a bonus as it enables me to see what's set up and how they interact with the live picture and objects which is useful.

However, when viewed through a recording or BI, they aren't visible. As you specifically say you see them through IE, it could be the norm give you're not meant to view footage this way.
 
  • Like
Reactions: JDreaming