Has anyone found a junction box (besides the PFA121) to mount cameras such as the IPC-B5442-ZE??? The mounts are on a 70mm square pattern and the diagonal distance is 100mm which is just under 4 inches.
Ideally I am looking for a junction box that is 1.25 to 1.5 inches deep to sit behind a vinyl siding block.
If I can't find a suitable junction box I am probably going to try and cobble together some coupling nuts and some wood screw threaded studs to give me something I can drill into the sheeting of my house, mount the siding block and then mount the camera. I would probably use loctite on the coupling nut to machine screw interface then antisieze on the screw threads to mount the camera to the coupling nuts.
If you guys have other suggestions please let me know (the camera MUST be mounted in the area of the siding block I linked above).
Ideally I am looking for a junction box that is 1.25 to 1.5 inches deep to sit behind a vinyl siding block.
If I can't find a suitable junction box I am probably going to try and cobble together some coupling nuts and some wood screw threaded studs to give me something I can drill into the sheeting of my house, mount the siding block and then mount the camera. I would probably use loctite on the coupling nut to machine screw interface then antisieze on the screw threads to mount the camera to the coupling nuts.
If you guys have other suggestions please let me know (the camera MUST be mounted in the area of the siding block I linked above).