Latest New 20181228 Firmware for DH_IPC-HX5X3X-Rhea

[Olivier_V]

Thank you !

 

[arni7]

Hello, I have such an IPC-HDBW5431E-Z camera Software version: 2.460.0000.10.R, Build date: 5/23/2017
I would like to upload rtmp firmweare whether to upload firmware from this thread or newer from the second thread Latest New 20190111 Firmware for DH_IPC-HX5X3X-Rhea

 

[IAmATeaf]

If you’re going to upgrade my view is you might as well go with the latest. I’ve got the latest installed on my cams and haven’t really seen any issues.

 

[arni7]

[QUOTE = "IAmATeaf, post: 435304, członek: 69210"]
Jeśli zamierzasz ulepszyć mój widok, możesz równie dobrze skorzystać z najnowszej wersji. Mam najnowsze zainstalowane na moich kamerach i naprawdę nie widziałem żadnych problemów.
[/ZACYTOWAĆ]



show the link to the latest firmware you have installed?

 

[Scott Ritchey]

I tested IPC-HDBW4231F-E2-M with this firmware, not work, so the multi-lens use a special firmware, i will ask them to send me a latest new one if they have.

Checking if there is an update is for HDBW4231F-E2-M multi-lens.
I have no real problems and cam works OK in Explorer but Chrome requires a plug-in.
I have firmware version 2.622.0000000.32.R, Build Date: 2019-08-27

 

[EMPIRETECANDY]

Checking if there is an update is for HDBW4231F-E2-M multi-lens.
I have no real problems and cam works OK in Explorer but Chrome requires a plug-in.
I have firmware version 2.622.0000000.32.R, Build Date: 2019-08-27

I just check it, still no new update, i will make a checking with their engineer.

 

[Scott Ritchey]

Camera not yet installed but seems to work fine. Just wanted to follow-up on possible firmware update before installing.. Super after-market tech support. Thanks.

 

[Martin M]

Been using this cam from last July and I can note some things:
1. Picture is great, camera has worked well.
2. Still IVS on only one camera, its either 1 or 2 not both.
3. I hate these IR leds, they are inside dome and even with rubber between camera lens and dome they still make everything on image "glow and foggy" at night when ir leds are on. Yes I turned them off and I would be statisfied, but after power loss camera goes back to SmartIR and needs intervention again to turn IR off. That is real pain in the ....
Hope there will be fix for these two issues, nothing in almost 10 months tho...

 

[looney2ns]

Been using this cam from last July and I can note some things:
1. Picture is great, camera has worked well.
2. Still IVS on only one camera, its either 1 or 2 not both.
3. I hate these IR leds, they are inside dome and even with rubber between camera lens and dome they still make everything on image "glow and foggy" at night when ir leds are on. Yes I turned them off and I would be statisfied, but after power loss camera goes back to SmartIR and needs intervention again to turn IR off. That is real pain in the ....
Hope there will be fix for these two issues, nothing in almost 10 months tho...

Clean the domes inside and out.