Laview 32 channel NVR w/ POE Switches Problem

Discussion in 'Camera Installation Questions' started by NHAV, Oct 4, 2018.

Share This Page

  1. NHAV

    NHAV n3wb

    Joined:
    Oct 4, 2018
    Messages:
    1
    Likes Received:
    0
    Location:
    Rumney, NH
    Good evening,

    I am hoping that someone in this forum can assist me. I am currently working on a 32 channel 4k install with a mix of bullet and dome cameras. I keep running into the problem of only seeing 1 camera on the POE gigabit network switches when I have all POE ports populated with cameras. I have tried this on multiple NVR's and with different cameras going through different switches and keep having the same result. Any advise would be appreciated. Thank you.
     
  2. bababouy

    bababouy Known around here

    Joined:
    Mar 29, 2015
    Messages:
    1,010
    Likes Received:
    1,445
    Location:
    almost to the bottom
    You may be having an IP conflict if all cameras are on the default IP addresses. You may need to add one camera at a time, and change the address to a static before you add another camera to the network.
     
    Sir CanoScan, looney2ns and fenderman like this.