- Jan 15, 2017
- 3
- 0
I'm setting up the Laview system. When no cameras are plugged in and the system reboots, I can access the NVR through a local computer browser. When I plug one or more cameras in, there appears to be an IP address conflict and nothing shows through the browser plugin.
Also after plugging a camera in and click the configuration->network tab the NVR settings freeze and I can't navigate anywhere through the NVR.
I can see everything correctly through the NVR or iphone app.
I assigned a static IP to the NVR 192.168.1.151 and gateway is set to router at 192.168.1.1. Internal NIC address is 192.168.254.1 and the cameras appear to all have unique IP addresses. There's nothing else on the network with the IP of the NVR or NIC address.
I've been messing around with this for a couple of days and would appreciate any help.
Also after plugging a camera in and click the configuration->network tab the NVR settings freeze and I can't navigate anywhere through the NVR.
I can see everything correctly through the NVR or iphone app.
I assigned a static IP to the NVR 192.168.1.151 and gateway is set to router at 192.168.1.1. Internal NIC address is 192.168.254.1 and the cameras appear to all have unique IP addresses. There's nothing else on the network with the IP of the NVR or NIC address.
I've been messing around with this for a couple of days and would appreciate any help.