Lense Fog on 2231RP-ZS

[IReallyLikePizza2]

I have had my 2231RP-ZS cameras mounted for quite some time now, and one of them appears to be getting some rain on it, and now has some fogging going on. Is this something I should just leave alone and let dissipate on its own, or do I need to cover it up better? I thought It would be in a good enough place, but after some heavy rain recently its noticeable

I attached some pictures of before and after, and where its mounted

What are your thoughts?

 

[bigredfish]

Are you talking about the top right corner in the 3rd pic? Looks like a water spot and/or a bit of glare?

Anytime it rains I get water spots but they tend to go away relatively quickly.

 

[IReallyLikePizza2]

Funnily enough right after posting it seems to have cleared up... I guess its no issue. They are IP67 so that should be a perfect location for them

 

[bigredfish]

Yeah, with one taken at 9 in the morning and one at 1:30 in the afternoon, I think you’re just seeing sun glare

 

[IReallyLikePizza2]

Its 100% fog, I just happened to take those as examples

 

[IReallyLikePizza2]

Well, it was lens fog on the inside after all. We had some heavy rain and the camera got filled with water this time. I went out to wipe the lens and it was clean, all the water was on the other side

Wondering now if I should try and "fix" this camera or accept that it will keep happening and find the camera a new home

Its getting better and better as time goes on, I'm hoping we don't have any more rain