Live View keeps saying I need plugin??

[beardog]

Hey guys. I am trying to configure my first Hikvision DS-2CD2332-I.

In Live View Mode at the LAN address 192.168.1.118 it says I need the plugin to view.

I download and install plugin and continues to say the same thing.

Is it possible I have something wrong with my port # (800) or HTTP port# (80)

Do I check the box "enable DHCP" in SADP?

I am lost so any advice will help.

 

[tomw]

what browser are you using on what operating system?

Try with IE9.

 

[beardog]

what browser are you using on what operating system?

Try with IE9.

IE and Firefox on Windows 10 i4790 Dedicated BI machine - Still not working. Is it possible it doesn't show up because I have the camera connected through multiple switches. (Camera, PoE Switch, Regular Switch)

 

[steve457]

Are you sure you are using IE on Windows 10 and not the Microsoft Edge browser? I had problems with the Edge browser, but was able to get IE working. Be sure to close all browsers when installing the plugin.

 

[marid2apterbilt]

Are you sure you are using IE on Windows 10 and not the Microsoft Edge browser? I had problems with the Edge browser, but was able to get IE working. Be sure to close all browsers when installing the plugin.

^^^^^^^
When you upgrade to win 10 it changes your default browser to "EDGE"

I had same issue.

top right of EDGE browser clik "..." then select open in internet explorer or change your default browser setting in the OS

 

[khx73]

Don't forget to use compatibility view in IE. (Add that IP to the list) The plugin wouldn't run until I did that.
(Also, watch for the banner that pops up at the bottom the 1st time, asking if you'll allow the plugin to run).

 

[beardog]

Don't forget to use compatibility view in IE. (Add that IP to the list) The plugin wouldn't run until I did that.
(Also, watch for the banner that pops up at the bottom the 1st time, asking if you'll allow the plugin to run).

Fixed in Firefox. Thanks everyone.