Mini PTZ v2: 4x optical zoom version

Thanks Bob
mine are here in the sates already should be at my house this coming Thursday.
Hope they are fine with no problems.
Regards.
Chewie
 
Received the cameras today, no damage at all, fire them up and change the IP Address and added them to blue Iris, they are working fine so far, I haven't change any settings yet, looks good so far.
Chewie
 

Attachments

  • 20160912_172240.jpg
    20160912_172240.jpg
    4 MB · Views: 26
Here are more pics.
 

Attachments

  • 20160912_172941.jpg
    20160912_172941.jpg
    3.3 MB · Views: 43
  • 20160912_173818.jpg
    20160912_173818.jpg
    3.9 MB · Views: 46
  • 20160912_202033.jpg
    20160912_202033.jpg
    4.1 MB · Views: 51
  • Cam6.20160912_204021.jpg
    Cam6.20160912_204021.jpg
    94.7 KB · Views: 50
  • Cam7.20160912_203851.jpg
    Cam7.20160912_203851.jpg
    84.5 KB · Views: 47
  • Like
Reactions: ilrider78
@chewie, looking good. Before you mount them can you measure the POE? Someone had asked what the measurement was but I had already mounted mine, thanks.
 
Last edited by a moderator:
Hello Bob
the length of the wires are 8 inches,
from connector to connector is 4.5 inches
is a rectangular shape 2 sides are 1.0- inch, the other 2 sides are 1 inch 4/8's.
Regards.
Chewie
 

Attachments

  • 20160913_184257.jpg
    20160913_184257.jpg
    2 MB · Views: 23
  • Like
Reactions: bob2701
I ordered one of those.i fully inspected the cables.i don't think it's fully waterproof unless u put coax tape or inside junction box.


Sent from my iPhone using Tapatalk
 
Hello All
Here are some night vision pics, I noticed that both cameras on the upper right corner is dark like a shadow, not sure if is the walls or the cover on the camera.
One of the camera has an issue, if I set with the frame rate of 30 and IF frame of 15 the camera is fine but if I lower the frame rate to 25 or 15 starts to disconnect with POE adapter and 12 volt supply adapter, any Ideas?
Bob - can you share your settings?
Regards.
Chewie
 

Attachments

  • Cam6.20160914_195009.jpg
    Cam6.20160914_195009.jpg
    67.9 KB · Views: 50
  • Cam7.20160914_194853.jpg
    Cam7.20160914_194853.jpg
    82.4 KB · Views: 46
Thanks Bob, I set mine close to the defaults and is not disconnecting any more, I will see when I get home, but it did not have this issue until I change the settings, I will ask jack and see what he has to say.
Regards.
Chewie
 
Thanks Bob, I set mine close to the defaults and is not disconnecting any more, I will see when I get home, but it did not have this issue until I change the settings, I will ask jack and see what he has to say.
Regards.
Chewie
 
I set one up, not perfect yet, here are some night pictures, It looks good.
Regards.
Chewie
 

Attachments

  • Cam6.20160917_194137.jpg
    Cam6.20160917_194137.jpg
    90.9 KB · Views: 45
  • Cam6.20160917_223137.jpg
    Cam6.20160917_223137.jpg
    92 KB · Views: 38
  • Cam6.20160917_192005.jpg
    Cam6.20160917_192005.jpg
    94.5 KB · Views: 41
  • Cam6.20160917_194329.jpg
    Cam6.20160917_194329.jpg
    103.7 KB · Views: 35
  • Cam6.20160917_223413.jpg
    Cam6.20160917_223413.jpg
    118.9 KB · Views: 42
  • Like
Reactions: ilrider78