It sounded that you are saying that Dahua dome has better IR then Huisun?The Dahua and Huisun share the same image sensor, so expect image quality to be basically equal.. but thats where the similarities stop, its IR is much stronger from what i've seen so its even better in low light.. but its not got as much zoom either, and its an indoor cam, so taking it outside is at your own risk.
have you tested with external 12V adapter to make sure the PoE board in the cam is the problem?This splitter has been recommended http://www.amazon.com/exec/obidos/ASIN/B00SM196AE/ref=nosim/ipctk-20. Does anyone have a link for the injector?
I plugged in external power with the CAT5 cable plugged into a non-POE port, but not sure if it had enough watts to power camera. We have swapped several cables, POE ports, etc. I have plugged my other POE camera into the same port that the bad camera was in and it ran without issue. When I plug the bad camera into any of the POE ports, the POE indicator lights green, but the activity indicator lights solid green as well, when it should be blinking amber. The IR lights flash red one time after reinserting the network cable into a POE port, then go dark. I am wondering now if it's the network adapter in the camera that's the problem?have you tested with external 12V adapter to make sure the PoE board in the cam is the problem?
if so, and the cam is known to work with 12V input, then the splitter is all you need,
using your existing POE switch as the power source. Now, if it doesn;t work, then
the problem is on your cable or your switch. If it's the switch, then an injector may
be useful, but if it's the cable, injector at switch will not help...
Hi Cole. Thanks for the link but they don"t deliver to the US.. I think I found something that will work.. ThxThe PoE in my V2 recently packed in, best fix: http://amzn.to/1WgozaH
Ordering a 30 watt injector to rule out lack of power issue.. 12 watt does nothing..I had my Huisun V2 running on a few different 12V 1.5A power supplies and it was not enough, The cam was acting strange. I found a 12V 2.5A power supply, plugged it in and the cam is running perfect now. I think that would be equal to 25 watts?
If you are going to order a power supply, I would not order one less then 25 watts. That will allow for variance in the manufacturers power rating vs actual power the power supply puts out.
This cam is not supposed to need more then 12V 1.5A but I tried 2 power supplies rated for this level of power, one of them was a netgear switch power supply that was heavy and I think, pretty good quality and the can would not run right with these.
These 48V to 12V POE units were recommended to me by 2 different people here as something that will work with the Huisun PTZ. It takes the 48V from a POE power source and turns it into 12V so you can use a cam that requires 12V and power it with a POE switch.
http://www.amazon.com/gp/product/B00SM196AE/ref=crt_ewc_title_dp_1?ie=UTF8&psc=1&smid=A1UNETF5RJMBZF
Robert
These work great http://www.amazon.com/CMVision-Listed-Regulated-Adapter-Illuminator/dp/B00K919SHG/ref=pd_sim_421_5?ie=UTF8&dpID=41bmpfKGmQL&dpSrc=sims&preST=_AC_UL160_SR160%2C160_&refRID=0AN8TF7Z07PZ56F2SM86 I had a poe cam die and have been using these with great success.I had my Huisun V2 running on a few different 12V 1.5A power supplies and it was not enough, The cam was acting strange. I found a 12V 2.5A power supply, plugged it in and the cam is running perfect now. I think that would be equal to 25 watts?
If you are going to order a power supply, I would not order one less then 25 watts. That will allow for variance in the manufacturers power rating vs actual power the power supply puts out.
This cam is not supposed to need more then 12V 1.5A but I tried 2 power supplies rated for this level of power, one of them was a netgear switch power supply that was heavy and I think, pretty good quality and the can would not run right with these.
These 48V to 12V POE units were recommended to me by 2 different people here as something that will work with the Huisun PTZ. It takes the 48V from a POE power source and turns it into 12V so you can use a cam that requires 12V and power it with a POE switch.
http://www.amazon.com/gp/product/B00SM196AE/ref=crt_ewc_title_dp_1?ie=UTF8&psc=1&smid=A1UNETF5RJMBZF
Robert
Last tool for reset huisun:View attachment BatchControl-2016.rarOK, I my 30 watt injector arrived today, hooked it up and I still get the same results. Bottom 2 IR lights light up briefly and then turn off, no activity on the switch and the camera does not show up on my network. So I'm thinking it's either the cable on the camera or bad network or POE board? Does anyone know if there is a way to attempt a reset of this camera without being able to connect to it, ie. a button to reset? I've posted a couple of questions to the seller and the only response I received was to reset the camera, but I'm not sure if that's possible without the network connection.
Not understanding why you ordered an injector when you think the POE card went bad? Did you try a separate power supply connnected to the power plug on the camera? If so and it worked then you want a splitter not an injector.OK, I my 30 watt injector arrived today, hooked it up and I still get the same results. Bottom 2 IR lights light up briefly and then turn off, no activity on the switch and the camera does not show up on my network. So I'm thinking it's either the cable on the camera or bad network or POE board? Does anyone know if there is a way to attempt a reset of this camera without being able to connect to it, ie. a button to reset? I've posted a couple of questions to the seller and the only response I received was to reset the camera, but I'm not sure if that's possible without the network connection.
I think he ordered the type of injector that takes 48V from POE and turns it into 12V with a connector for the cam.Not understanding why you ordered an injector when you think the POE card went bad? Did you try a separate power supply connnected to the power plug on the camera? If so and it worked then you want a splitter not an injector.
It's all good. I was looking at his post below and that did not sound like the splitter you list in your link. Hope he gets it working.I think he ordered the type of injector that takes 48V from POE and turns it into 12V with a connector for the cam.
That is what the unit linked to below does, not sure if that is the one he bought or not. With this, if you have a POE switch, you don't need to buy a separate 12V power supply.
http://www.amazon.com/exec/obidos/ASIN/B00SM196AE/ref=nosim/ipctk-20
My apologies if you already knew this.
Robert
OK, I my 30 watt injector arrived today, hooked it up and I still get the same results. Bottom 2 IR lights light up briefly and then turn off, no activity on the switch and the camera does not show up on my network. So I'm thinking it's either the cable on the camera or bad network or POE board? Does anyone know if there is a way to attempt a reset of this camera without being able to connect to it, ie. a button to reset? I've posted a couple of questions to the seller and the only response I received was to reset the camera, but I'm not sure if that's possible without the network connection.
He ordered an injector with higher wattage to rule out lack of power.Not understanding why you ordered an injector when you think the POE card went bad? Did you try a separate power supply connnected to the power plug on the camera? If so and it worked then you want a splitter not an injector.
That would be a splitter not an injector.I think he ordered the type of injector that takes 48V from POE and turns it into 12V with a connector for the cam.