Mini-Review - EmpireTech LPR413-Z3

I am a true newbie that needs help, I have installed this 413 camera and I am still trying to utilize the lpr feature. My NVR is not capable of recording the data so I installed a micro sd card.

I have found the data in Query but can not view it download or export. Does anyone have any suggestions?
 
Last edited:
Does it have ONVIF - M ?

ONVIF Profile M (released in 2021) is a standard for metadata and event communication, enabling interoperability between AI-driven video analytics applications, IP cameras, and management software. It standardizes how analytics data—such as object classification, facial recognition, and license plate recognition—is shared between different vendors' products. [1, 2, 3]
 
observant1 said:
Does it have ONVIF - M ?

ONVIF Profile M (released in 2021) is a standard for metadata and event communication, enabling interoperability between AI-driven video analytics applications, IP cameras, and management software. It standardizes how analytics data—such as object classification, facial recognition, and license plate recognition—is shared between different vendors' products. [1, 2, 3]
Click to expand...
Specs here state "ONVIF (Profile S/Profile T)".
 
  • Like
Reactions: observant1
JimEPage said:
I set an intrusion box and trigger line in the camera but get NO corresponding alerts in BI. No idea why.
Click to expand...
Does BI's built-in "Help" shed some light on it under "Triggering and Motion Detection" => "ONVIF/Camera Events" ?
 
TonyR said:
Does BI's built-in "Help" shed some light on it under "Triggering and Motion Detection" => "ONVIF/Camera Events" ?
Click to expand...
Oh, I'm sure it could provide insight after wading through their encyclopedia. But that's the reason people come and ask in a forum like this, isn't it? Some sort of shortcut that others have discovered to make it easier/faster with this particular model?
Or was your question rhetorical?
 
Last edited:
Last edited:
  • Haha
Reactions: bigredfish
Bumping for the sales
:lmao:
 
I picked up a LPR413-Z3 from Andy and have been messing around with it. It seems to be doing a pretty good job of picking up the Tennessee 3M plates.

I don't have a lot of ambient light where I'm at. Sometimes a car going by will trigger and sometimes it won't. Any suggestions on the settings? I currently have the IR brightness at 55. Maybe bump it up?

ANPR5.jpg
 
I suspect that vehicles with working courtesy lights on the plate are easily read even if they are the new 3M plates. They’re visible to the naked eye in most cases.

Ones without working courtesy lights, more difficult
 
You must log in or register to reply here.
Top Bottom