Motion trigger when switching to night/IR vision

Operations

n3wb
Joined
Dec 26, 2019
Messages
16
Reaction score
0
Location
The Netherlands
My Dahua camera triggers an alert when it switches from normal light to IR (because it is getting dark outside). I don't use day/night profiles.
Is it possible to solve this false alarm?
 

Edcfish

Getting the hang of it
Joined
May 31, 2019
Messages
60
Reaction score
51
Location
USA
Try adjusting the values located... in Blue Iris, going to Camera Properties -> Trigger tab, -> Motion Sensor Configure button -> Advanced -> Object Detection Edit button-> Reset Detector When Object Size Exceeds...
 

Operations

n3wb
Joined
Dec 26, 2019
Messages
16
Reaction score
0
Location
The Netherlands
Try adjusting the values located... in Blue Iris, going to Camera Properties -> Trigger tab, -> Motion Sensor Configure button -> Advanced -> Object Detection Edit button-> Reset Detector When Object Size Exceeds...
What is a good working percentage you think? Sometimes i also get a false alarm from car headlights. I picked 40% now.
 
Top