Motion trigger when switching to night/IR vision

[Operations]

My Dahua camera triggers an alert when it switches from normal light to IR (because it is getting dark outside). I don't use day/night profiles.
Is it possible to solve this false alarm?

 

[Edcfish]

see this thread: Stopping an alert when camera switches from night vision to daytime

 

[Operations]

see this thread: Stopping an alert when camera switches from night vision to daytime

Thanks for your reply, but i have watched the first two videos and day/nighttime is not even mentioned. He makes one remark about "make time" option and light, but that is all.

So i am not really sure what to do now.

 

[Edcfish]

Try adjusting the values located... in Blue Iris, going to Camera Properties -> Trigger tab, -> Motion Sensor Configure button -> Advanced -> Object Detection Edit button-> Reset Detector When Object Size Exceeds...

 

[Operations]

Try adjusting the values located... in Blue Iris, going to Camera Properties -> Trigger tab, -> Motion Sensor Configure button -> Advanced -> Object Detection Edit button-> Reset Detector When Object Size Exceeds...

What is a good working percentage you think? Sometimes i also get a false alarm from car headlights. I picked 40% now.

 

[DwightMorgan]

Didn't seem to help mine... set at 25%