I recently bought 2 of these IZTouch IZSP-012 cameras off Amazon. Got them on my network as follows:
Cam 1:
Internal IP: 192.168.0.39
Port: 5000
RTSP: 554
Cam 2:
Internal IP: 192.168.0.43
Port: 5000
RTSP: 555
The problem is when I have my port forwarding going to 555 for Cam 2, it fails to get a stream. The only way I can get a stream to work is if I forward port 555 to 554 and miraculously it gets the proper Cam 2 video stream. The problem now is that when I go to use PTZ, it's controlling Cam 1 and not Cam 2 - I suspect because it's using the 554 port.
How can I properly set this up to view and control each camera independently?
Thank you.
Cam 1:
Internal IP: 192.168.0.39
Port: 5000
RTSP: 554
Cam 2:
Internal IP: 192.168.0.43
Port: 5000
RTSP: 555
The problem is when I have my port forwarding going to 555 for Cam 2, it fails to get a stream. The only way I can get a stream to work is if I forward port 555 to 554 and miraculously it gets the proper Cam 2 video stream. The problem now is that when I go to use PTZ, it's controlling Cam 1 and not Cam 2 - I suspect because it's using the 554 port.
How can I properly set this up to view and control each camera independently?
Thank you.