cpo888
n3wb
Planning to buy a HDW5231R-ZE but noticed that it is only available in PAL. Should I worry about it (PAL vs NTSC)? I'm in CA.
Thanks.
Thanks.
Need advice on PAL format for HDW5231R-ZE
- Thread starter cpo888
- Start date
-
- Tags
- hdw5231r-ze
Ntsc and pal is a old tv thing. A new tv’s and other grahfic devices are at least 1920x1080
See this link: NTSC - Wikipedia
Verzonden vanaf mijn iPhone met Tapatalk
See this link: NTSC - Wikipedia
Verzonden vanaf mijn iPhone met Tapatalk
mat200
IPCT Contributor
- Joined
- Jan 17, 2017
- Messages
- 13,962
- Reaction score
- 23,274
Hi CPO - as biscuit points out - don't worry, no need to with IP cameras.
NoloC
Getting comfortable
- Joined
- Nov 24, 2014
- Messages
- 701
- Reaction score
- 454
Actually tvl refers to horizontal resolution in an analog camera system. Television lines - Wikipedia
I believe what you are trying to point out is that the analog television standards had a different number of scan lines. PAL - 625/ 25 fps and NTSC - 525/ 30fps
PAL - Wikipedia In practice PAL was somewhat higher resolution than NTSC, but that was in the old analog days.
Only the frame rates are different with IP cams and the sub streams may be different resolutions. Same pixels NTSC or PAL on an IP cam.
EMPIRETECANDY
IPCT Vendor
just flash the firmware into NTSC, easy to find them on dahua website now for PAL and NTSC.
cpo888
n3wb
Cannot find the IPC-HDW5231R-ZE camera on the Dahua website (www1.dahuasecurity), only the IPC-HDW5231R-Z. If I search for HDW5321R-ZE, it shows the page but
browser won't open any of the links (Datasheet, User Manual,...). can you send me a link for the firmware?
cpo888
n3wb
Never mind. User error. Found the correct page in Eco-savvy 3.0 ePoE Series
http://www1.dahuasecurity.com/Products/AccessorySelector