Background
Brand new (not gray market, if this matters) Hikvision NVR and IP camera,
Camera model: DS-2CD2T55FWD-I5
NVR: DS-7604NI-E1/4P
Initially I was able to connect to the camera via the browser by changing my IP/Subnet to match that of the camera and connecting directly to the NVR port, I then changed the IP to one from my internal LAN and the SADP tool confirms the IP was changed. The problem is that I can no longer long into it via the browser, also the IP on the NVR shows it as 192.0.0.5 (IP of POE port possibly?) on plug and play, if I change to manual and put the new address I changed it to I lose connection to camera.
Any suggestions on how I can once again connect to the camera? Thanks in advance.
Brand new (not gray market, if this matters) Hikvision NVR and IP camera,
Camera model: DS-2CD2T55FWD-I5
NVR: DS-7604NI-E1/4P
Initially I was able to connect to the camera via the browser by changing my IP/Subnet to match that of the camera and connecting directly to the NVR port, I then changed the IP to one from my internal LAN and the SADP tool confirms the IP was changed. The problem is that I can no longer long into it via the browser, also the IP on the NVR shows it as 192.0.0.5 (IP of POE port possibly?) on plug and play, if I change to manual and put the new address I changed it to I lose connection to camera.
Any suggestions on how I can once again connect to the camera? Thanks in advance.