Just came out today for those interested, I know some peeps have been asking for this!
DS-7608NI-I2/8P | Pro Series | Network Video Recorders | Hikvision | Hikvision
DS-7608NI-I2/8P | Pro Series | Network Video Recorders | Hikvision | Hikvision
New firmware for AU NVR (DS-7608NI-I2/8P)
- Thread starter Encryptme
- Start date
alastairstevenson
Staff member
Thanks, I'm not sure the smart event for face detection is working in the same way. I was getting an email alert, haven't seen one come through since the update but will test more.
For you information, a newer firmware (v4.51.005) was posted a little while ago on Hikvision's Global site for the 76xxNI-I series NVRs which has been discussed at length on another forum.
There has been very positive feedback on this newest firmware update. In particular the web interface has undergone a major update and been reported that it now works on MacOS with full live view etc.
The web interface looks more modern and from my experience is much snappier.
I allegedly have an Australian region 7608NI-I2/8P NVR which I've updated with V4.51.005 firmware and other earlier firmwares from Hikvision's download portal. The only drawback (if there is one) is that Hikvision Aust will not provide support for firmware not supplied by them.
In my case I'd rather have the updated features and fixes than be stuck on an old firmware release.
There has been very positive feedback on this newest firmware update. In particular the web interface has undergone a major update and been reported that it now works on MacOS with full live view etc.
The web interface looks more modern and from my experience is much snappier.
I allegedly have an Australian region 7608NI-I2/8P NVR which I've updated with V4.51.005 firmware and other earlier firmwares from Hikvision's download portal. The only drawback (if there is one) is that Hikvision Aust will not provide support for firmware not supplied by them.
In my case I'd rather have the updated features and fixes than be stuck on an old firmware release.
I'm the same, I need to have something that works, and so far the local support has been useless so I'm not sacrificing anything there.
Having run this a little longer I'm still seeing zero smart event emails for face detection, which is not looking good.
@rcheli32 here you go....
Scroll down the page to the firmware link. This is the exact link I used to update my NVR.
Scroll down the page to the firmware link. This is the exact link I used to update my NVR.
Sorry I meant a link to the discussion forum about the firmware?@rcheli32 here you go....
Scroll down the page to the firmware link. This is the exact link I used to update my NVR.
Framedtrash
n3wb
I performed a quick test using Intrusion Detection smart event to trigger an email alert. It worked fine. I know that's not face detection but seems the email alerts are working.
Great feedback. simple events with emails like motion detection are working, just no clue why the face detection smart event won't. Assuming it is a bug specific to face smart events, I might have to look for another event I can use instead.
Framedtrash
n3wb
I can't even find the option for face detection?
Where about is it I'm happy to test it out on mine
Where about is it I'm happy to test it out on mine
It is a smart event on supported cameras. Unfortunately the accusense line dropped this smart event and instead use a different (VCA?) mechanism.
I'm seeing no change to the firmware download file, what update are you looking at?
Not sure what you mean by “what I’m looking at”… it’s on the global site, says it’s .006 and after I installed it, my NVR reports it as .006 I never had .005 I’m coming from 4.50 I like the web interface changes. It looks more like the local interface.