So I get my LTS setup from milksbad (who was great to deal with for those looking), finally install it and then I made a bonehead move. I was messing in the menus, changed something in the settings and now I have no cameras and I can't figure out how to fix it.
My NVR shows the cameras present but won't/ can't connect. Also shows cameras in ports that nothing is present in. I've tried rebooting the NVR to the factory default but it doesn't seem to help anything w the cameras. If I go and try to delete the cam so that I can re-add it says "No IP camera for deletion".
I have one camera which I didn't mess with and everything with that one works fine the moment I plug it in.
Any suggestions would be appreciated.
[h=2]LTN8916-P16
CMIP3042W[/h]
-Newbie
My NVR shows the cameras present but won't/ can't connect. Also shows cameras in ports that nothing is present in. I've tried rebooting the NVR to the factory default but it doesn't seem to help anything w the cameras. If I go and try to delete the cam so that I can re-add it says "No IP camera for deletion".
I have one camera which I didn't mess with and everything with that one works fine the moment I plug it in.
Any suggestions would be appreciated.
[h=2]LTN8916-P16
CMIP3042W[/h]
-Newbie