NVR Is painfully slow after setting up motion detection.

tubac

tubac

Pulling my weight
Aug 22, 2014
267
113
15 minutes from Mexico
After setting up motion detection for the first time since I got my Dahua NVR ( )my system is crawling. I have it set to record full time on all 14 cameras, plus motion detection on all 14. I use Smart PSS in addition which is where I first encountered the slowdown. It takes 10 seconds to call up a channel and when I do, the Device CFG / encode fields do not populate for 10 minutes or so. When they do I cannot change the settings to a different resolution for instance. It won’t let me apply or save the settings. The NVR is running the older firmware 3.216.0000002.0 build:2019-01-02. What also might be relevant is my internet connection. I get 7 megs down on a good day. Any ideas would be greatly appreciated!

Thanks,
Tubac
 
I ditched my hikvision 8 ch NVR for a $30 used PC and $60 BlueIris. The results were that BlueIris together with Deepstack will actively send me a text when its AI detects a person in the camers/hours I specified. When I had my motion detection on my Hikvision NVR, 95% of what I got was false alarm so then I had to shut the motion detection off.
It's free to try out BlueIris.
 
You must log in or register to reply here.
Top Bottom