I have a Dahua NVR5432-16P-4KS2E and am having an issue with the HDMI2 output.
HDMI 1 is hooked to 82" Samsung 4k works perfectly....
recently added a small monitor , hooked to HDMI2 configured the settings on the "display" section on the NVR
Picture is there... working
Problem is that HDMI2 only displays the D1 channel.. there seems to be a setting to change that but it has no effect.
I have also tried from the web interface (has no selection for channel)
I even tried to just use the tour mode, but that does not function properly at all
just jumps around to multiple splits etc and not what I actually selected in the settings at all.
Any advice... I did try searching, but just couldn't find a thread with the specific issue.
HDMI 1 is hooked to 82" Samsung 4k works perfectly....
recently added a small monitor , hooked to HDMI2 configured the settings on the "display" section on the NVR
Picture is there... working
Problem is that HDMI2 only displays the D1 channel.. there seems to be a setting to change that but it has no effect.
I have also tried from the web interface (has no selection for channel)
I even tried to just use the tour mode, but that does not function properly at all
just jumps around to multiple splits etc and not what I actually selected in the settings at all.
Any advice... I did try searching, but just couldn't find a thread with the specific issue.