NVR5XXX-4KS2 latest new firmware.

E

EMPIRETECANDY

IPCT Vendor
Nov 8, 2016
8,741
25,274
HONGKONG
Hey Guys
Here is the new adding for the NVR5XXX-4ks2 NVRs.

FW Version: DH_NVR5XXX-4KS2_MultiLang_V3.215.0000001.0.R.20180326

Functions adding.

1. Client playback effects are optimized for higher multiple playback
2. Configuration restore default unified
3. pos demand optimization
5. Increase IP availability for test IP settings
6. Support smart picture download
7. Increase support for Lechange 3.0
8. Support Overseas Multilingualism
9. channel coding strategy adjustment
10. The default display resolution scheme is unified
11. Device Initialization Password Reset Function Add Enable Switch and Optimization
12. custom configuration optimization, support configuration item compatible merge
13. Limiting the interconnection of domestic products with International models
14. Support DHCP to set DNS
15. Overseas optimization of license plate detection
16. Support preview decoding buffer adaptive
17.flash space optimization, increase the extended partition support
18. Support MP4 format backup
19. Close Dahua DDNS, only close the configuration interface, function reservation
20.Overseas Anti-Cross Goods - Domestic Procedures for Upgrading Overseas Programs
21. Support device abnormal information collection coredump
22. Overseas apps switch from easy4ip to DMSS

Here is the link from dahua about the releasing Note

https://www.dahuasecurity.com/asset...1-0-R-20180326_Release-Note-V1_3-20180508.pdf
Attention before upgrading, make sure your system no hacked Chinese models, or else the cams can't connect to the NVR anymore after updating. Also make sure your NVR is original english one and can be updated.
I can send firmware to 1-2 guys for testing firstly. Anyone is interesting,can contact me.
 
Last edited:
  • Like
Reactions: TVT73, rufunky, Crazykiller and 5 others
Firmware added, because i have to be careful for the new firmware releasing, sometimes easy make the camera crash and have to send back for fixing up,end users can' do anything.

Please use this link for the downloading.
IPcamtalk
 
Last edited:
  • Like
Reactions: Arjun
I would be interested in this firmware if it is the Dahua branded version. I have NVR and only cameras purchased from you Andy. Actually getting ready to order 2 more cameras from you. Thanks!
 
It should be, since it starts with DH (otherwise, should be General_NVR5XXX-4KS2.....).
I'm interested as well ....:)
 
  • Like
Reactions: EMPIRETECANDY
keithl said:
I would be interested in this firmware if it is the Dahua branded version. I have NVR and only cameras purchased from you Andy. Actually getting ready to order 2 more cameras from you. Thanks!
Click to expand...
Yes it’s with the logo. I can’t upload the firmware here , already contact @Mike to check for me.
 
Already send to @jmcu he is testing on it and when all well I will post the firmware here, little worry about this new firmware if can suits all NVR5xxx-4ks2 &POE version we sold before.
 
redfive said:
It should be, since it starts with DH (otherwise, should be General_NVR5XXX-4KS2.....).
I'm interested as well ....:)
Click to expand...
Buddy, i drop the new firmware with dahua logo to your skype please check it there, not paste here before we fully tested. OK?Thanks.
 
Last edited:
Hmm.. Looks like no go for me - have one of 4431R-Z watching the road. What about compatibility to generic ONVIF cameras? Will they work? Pretty expensive NVR if it only works with Dahua cameras
 
SergeyAU said:
Pretty expensive NVR if it only works with Dahua cameras
Click to expand...
Good point that I never thought of (with respect to the chinese market cameras). Sometimes restrictions like this work, and sometimes they backfire. Sure makes BI look more attractive. Onvif cameras work for recording the video, but IVS doesn't work, so onvif support is of little practical value. I chose an external poe switch to keep the investment in the nvr down, and it's looking more and more like a good decision.
 
tigerwillow1 said:
Good point that I never thought of (with respect to the chinese market cameras). Sometimes restrictions like this work, and sometimes they backfire. Sure makes BI look more attractive. Onvif cameras work for recording the video, but IVS doesn't work, so onvif support is of little practical value. I chose an external poe switch to keep the investment in the nvr down, and it's looking more and more like a good decision.
Click to expand...

Difference between non PoE and PoE version isn’t that much.
 
  • Like
Reactions: Arjun
Crazykiller said:
Difference between the non PoE and PoE version isn’t that much.
Click to expand...
Depends on the definition of "that much" of course. Right now, on andy's ali store the added cost for 5216-4ks2 internal poe is $82 (30% additional), and on the amazon store it's an even $100 (31% more). I picked up a 28 port managed poe switch for about $75, pretty much breaking even. All I'm trying to say is if I ever want to walk away from the nvr, it will be $82 to $100 easier, and if I go to BI I had to buy the external switch anyway.
 
  • Like
Reactions: MacFun and BillG
I could not fit them both into the enclosure that I wanted so I went to all in one.
Need confirmation from someone on the firmware limitations with non Dahua official cameras. IVS/Motion sensing - don't care. For those I have official ones. Just need to be sure that others can still record and maybe NVR to receive an alarm message from the camera
 
SergeyAU said:
I could not fit them both into the enclosure that I wanted so I went to all in one.
Need confirmation from someone on the firmware limitations with non Dahua official cameras. IVS/Motion sensing - don't care. For those I have official ones. Just need to be sure that others can still record and maybe NVR to receive an alarm message from the camera
Click to expand...
Excellent question! Only somebody actually experimenting with the new firmware and chinese market cameras will be able to answer for sure. My expectation is that if you connect to the camera using onvif you'll be able to record the video and do nothing else. The test pilot won't be me. My 5216-4ks2 is doing everything I need it to with the current firmware, and I'm not going to risk losing use of the chinese market cameras that currently work exactly the same as the international cameras, other than the sensitivity of the image sensor.
 
The only thing that I want fixed is the image notification delay. On the camera image is instant, but instead of that image NVR sends the one it captures itself X seconds later
 
Does this new firmware fix inability to seek within the video when viewing exported .dav files in software media players? Is that what mp4 export file option is about?
 
What is the second newest firmware that still allows for use of Chinese cameras? I just realized I haven’t updated my nvr in a really long time
 
I'm running 3.210.0003.0, Build Date: 2017-04-18. There's at least one newer version prior to the one this thread is about.
 
  • Like
Reactions: aBs0lut3z33r00
You must log in or register to reply here.
Top Bottom