Painted Black IP Camera White / Before And After Pictures

jd415

Getting comfortable
Joined
Jun 1, 2019
Messages
316
Reaction score
997
Location
Los Angeles, California
I think I could of done a much better job around the front lens but other than that it came out pretty good. I'm surprised the microphone and speaker still work. I used Plasti Dip thanks for the tip @dathat. The best part of Plasti Dip is it can be removed if needed.

I should put a Dahua logo on it now ;)

IMG_1922.JPGIMG_1924.JPGIMG_1932.JPGIMG_1934.JPGIMG_1935.JPGIMG_1939.JPGIMG_1953.JPGIMG_1955.JPGIMG_1957.JPG
 
Last edited:
Joined
Apr 26, 2016
Messages
1,090
Reaction score
852
Location
Colorado
Honestly, if you had just scored around the tape where along the edge of the lens, to reduce the jagged tear edges, it would have been kind of hard to tell it wasn't factory for me.
 

Rebelx

Getting the hang of it
Joined
Jul 28, 2019
Messages
217
Reaction score
91
Location
Australia
Except for edges around lens, very nice work! See if it peels in the future though.
 

zero-degrees

Known around here
Joined
Aug 15, 2015
Messages
1,359
Reaction score
847
Haha - rarely does anyone paint black cameras white, it’s almost always the other way around due to the abundance of white cameras vs black.

Nice work though!
 
Top