Poe switch

[cctvcline]

I have 4 5mp ip cameras going over nanostations Iam using a 10/100 POE and the cameras keep dropping out will a gigabit switch help

 

[teaker]

Without knowing more, you could be using up to 400Mbps. So yes, a gigabit switch wouldn't hurt.

 

[nayr]

uh, nanostations are not GigE, and your bandwidth bottleknecks are likely the wireless.. usinga Gigabit switch wont do a damn thing.

 

[pal251]

Make sure your using the right kind of injector for the nanostations and not the typical 48 volt , I think they use 24 volt poe. Make sure you have good line of sight and your settings are correct...

 

[pozzello]

what are your cam's FPS, iframes & most importantly, bitrates set at?

the cameras are each connected via nanostations to the switch?
Or the switch is connected to the rest of the network via nanostations?

 

[gpower07]

I have 4 5mp ip cameras going over nanostations Iam using a 10/100 POE and the cameras keep dropping out will a gigabit switch help

I have 4 4mp ip cameras going over nanostations 2.4Ghz. set at 15FPS. idon'thave any problems. about 100 feets from the NVR and cameras and annotations are 30 feets high.

 

[hansik377]

I have good experience with [TABLE="width: 580"]
[TR]
[TD]D-Link DGS-1008D 8 Port Gigabit Switch[/TD]
[/TR]
[/TABLE]
Came very cheap and hasn't let me down once in 4 years