Hello, I have been trying for week to figure out why all a sudden I am not receiving push notifications on my Iphone, IPhone has the latest software, Blue iris is up to date, and I have uninstalled the server from my phone and re-added it. When I run the test from the alerts page, it says push to phone "OK" but nothing is coming thru. I do get a notifications when I leave the geo-fence but no sound with it. Alerts have no sound or pictures. Also I have uninstalled and re-installed cameras but that has not helped. I have also uninstalled the app itself from the phone. I have checked all settings in the phone and went by Verizon to make sure. What am I missing here? Thanks
Push notifications not coming thru
- Thread starter Cleve
- Start date
I also am experiencing this problem. It just started last night.
I have done all of the above - restart everything, reinstall and reconnect mobile app, roll back blue iris to 5.9.9.43 from 5.9.9.45 / 5.9.9.48
I sent an email to support.
Anyone else suddenly not getting push that were otherwise working OK?
Working on Android 15 with my Pixel 7, latest stable version of BI running, notices seem slow, like 30 seconds after event trigger, they use to be instantaneous.
Thats the first thing that i noticed was the long delay in notifications they I just quit getting them all togother.
pyspilf
Getting the hang of it
Some extra info. Have been having the same issue. Have tried every conceivable action to fix, both on Blue Iris server and iPhone app side. Log shows notifications pushed ok but nothing on phone.
Just got this back from BI Support:
Also, see this thread:
So now I can stop spending all day troubleshooting...
PS - sorry for posting the link to Reddit, didn't realize it had already been shared
Just got this back from BI Support:
Also, see this thread:
So now I can stop spending all day troubleshooting...
PS - sorry for posting the link to Reddit, didn't realize it had already been shared
pyspilf
Getting the hang of it
Wish I had read this thread before, would have saved me doing all the things you tried... I even restored a server backup from a week or so ago with an earlier version of BI...
Update, Support reached out to me and they are aware of the problem and hope to have it resolved in a couple of days.
pyspilf
Getting the hang of it
This just in from Support:
Good news! The 5.9.9.49 release resolves the issue with push notifications.
Please note, you will need to update to version 5.9.9.49 as previous versions are not updated.
Good news! The 5.9.9.49 release resolves the issue with push notifications.
Please note, you will need to update to version 5.9.9.49 as previous versions are not updated.
Support notified me to update to 5.9.9.49 which was sent out today. I did the updates but nothing was resolved. Still have the same problems. Had firewall and router settings check today too. Everything looked fine. Back to square one. I will give it a couple of days and reach out to support again.
pyspilf
Getting the hang of it
The update worked in my case for fixing the notifications, but a new issue has appeared, 3 times in the last 12h or so.
The log shows
Restarted after unexpected shutdown (5.9.9.49/1500/240)
and the Windows Event Viewer
Faulting application name: BlueIris.exe, version: 5.9.9.49, time stamp: 0x681b792b
Faulting module name: ucrtbase.dll, version: 10.0.19041.3636, time stamp: 0x81cf5d89
Exception code: 0xc0000409
Fault offset: 0x000000000007286e
Faulting process id: 0x1034
Faulting application start time: 0x01dbbf806885bc10
Faulting application path: C:\Program Files\Blue Iris 5\BlueIris.exe
Faulting module path: C:\WINDOWS\System32\ucrtbase.dll
Report Id: 4b0b0420-0940-454a-9cc3-ff1cf1134ae7
Faulting package full name:
Faulting package-relative application ID:
Has anyone else found this? I will reach out to Ken again with this new issue and update here. I have never seen this error before and it started shortly after updating to .49
The log shows
Restarted after unexpected shutdown (5.9.9.49/1500/240)
and the Windows Event Viewer
Faulting application name: BlueIris.exe, version: 5.9.9.49, time stamp: 0x681b792b
Faulting module name: ucrtbase.dll, version: 10.0.19041.3636, time stamp: 0x81cf5d89
Exception code: 0xc0000409
Fault offset: 0x000000000007286e
Faulting process id: 0x1034
Faulting application start time: 0x01dbbf806885bc10
Faulting application path: C:\Program Files\Blue Iris 5\BlueIris.exe
Faulting module path: C:\WINDOWS\System32\ucrtbase.dll
Report Id: 4b0b0420-0940-454a-9cc3-ff1cf1134ae7
Faulting package full name:
Faulting package-relative application ID:
Has anyone else found this? I will reach out to Ken again with this new issue and update here. I have never seen this error before and it started shortly after updating to .49
pyspilf
Getting the hang of it
So, it seems the update fixed notifications for me but causes Blue Iris to crash (at least a dozen times today) and for you it didn't fix the notifications...
Blue Iris is a complex piece of software and the fix was issued fast, I suppose some sort of regression error is possible... when I hear back from support I will post here in case anyone else runs across the same issue
Blue Iris is a complex piece of software and the fix was issued fast, I suppose some sort of regression error is possible... when I hear back from support I will post here in case anyone else runs across the same issue