At one time I turned on trigger->motion sensor->highlight->highlight motion to determine the minimum object size. I have since turned it off or selected "Do not highlight motion" yet I still get the blue boxes in the recorded images. Is this controlled somewhere else as well or am i looking at a bug? I am running 4.8.6.3
Recorded images have blue boxes superimposed on moving objects
- Thread starter MXW
- Start date
This setting is profile-dependent. Check that you have changed the setting for the active profile for the camera (or all profiles, if that is your intent).
Last edited:
I checked all profiles under each camera and all are set to "Do not highlight motion". When testing I only changed the "Active" to help with setting "Min. object size".
fenderman
Staff member
- Mar 9, 2014
- 36,891
- 21,408
disable test run video through motion detector
Request Some Help With Highlight Motion/Test Run Video Through Motion Detector
For some reason I can't see motion highlights when playing back recorded video (bvr format--direct to disc--10 second pre-trigger buffer) using the Test Run Video Through Motion Detector. For all but one camera that is. I've compared the settings of the one camera that does work with all the...
Thank you. I did have that option checked for one camera. Not sure how or why but it was set.disable test run video through motion detector
Request Some Help With Highlight Motion/Test Run Video Through Motion Detector
For some reason I can't see motion highlights when playing back recorded video (bvr format--direct to disc--10 second pre-trigger buffer) using the Test Run Video Through Motion Detector. For all but one camera that is. I've compared the settings of the one camera that does work with all the...ipcamtalk.com