Recording "no signal" camera

[FabPell980]

I have a problem with BlueIris recording.
I have a camera that goes off (electrically) on a schedule period of time. Why BlueIris is still recording the camera with the "no signal" picture?
There is a way to prevent recording when a camera is unreachable?

Thank you

 

[fenderman]

I have a problem with BlueIris recording.
I have a camera that goes off (electrically) on a schedule period of time. Why BlueIris is still recording the camera with the "no signal" picture?
There is a way to prevent recording when a camera is unreachable?

Thank you

Likely because you have it set to record continuously. Simply use the schedule in blue iris to disable the recording.

 

[FabPell980]

Yes, it works.
But this not solve my problem. Sometimes the Cam goes down due to power failure and BI still recording the screen with "no signal"

 

[fenderman]

Yes, it works.
But this not solve my problem. Sometimes the Cam goes down due to power failure and BI still recording the screen with "no signal"

So, let it record, storage is cheap...you need to solve the ultimate problem of your cameras going off line.