Replace Dahua NVR nvr5216_5232-16p-4ks2

[TaGosa]

I have Dahua NVR, nvr5216_5232-16p-4ks2 (I think 2017)
Something happend to NVR, and it will not power on. I looked into manual, there is no text about 'fuse' or anything. Google search also didn't return anything about fuse.

What optiond do I have, look for fuse, change power-supply or get a new NVR?

Which new NVR is a good replacement? I can really appreciate a quick answer. I can research, but a quick answer will be very helpful.

Current config.
NVR is connected to a router via ethernet.
I have Six DH-IPC-HDW4231EM-AS (POE) attached to it .
I have Two IPC-HDW2231RP-ZS (POE) attached to it.
I have two Amcrest.IP2M-841 (Ethernet) attached to it
I have one Amcrest.IP2M-841 (via wifi, wifi to router no to NVR directly)

I use IVR and motion detection on all cam.
I FTP the screenshots of motion from NVR to NAS.
I FTP the videos (motion detected video) to NAS.
NAS is connected to router to which NVR is connected.


Any NVR which is a good replacement?

Thanking you for helping me out on this.

 

[mat200]

I have Dahua NVR, nvr5216_5232-16p-4ks2 (I think 2017)
Something happend to NVR, and it will not power on. I looked into manual, there is no text about 'fuse' or anything. Google search also didn't return anything about fuse.

What optiond do I have, look for fuse, change power-supply or get a new NVR?

Which new NVR is a good replacement? I can really appreciate a quick answer. I can research, but a quick answer will be very helpful.

Current config.
NVR is connected to a router via ethernet.
I have Six DH-IPC-HDW4231EM-AS (POE) attached to it .
I have Two IPC-HDW2231RP-ZS (POE) attached to it.
I have two Amcrest.IP2M-841 (Ethernet) attached to it
I have one Amcrest.IP2M-841 (via wifi, wifi to router no to NVR directly)

I use IVR and motion detection on all cam.
I FTP the screenshots of motion from NVR to NAS.
I FTP the videos (motion detected video) to NAS.
NAS is connected to router to which NVR is connected.


Any NVR which is a good replacement?

Thanking you for helping me out on this.

If you picked this up from Andy I would ask if he has a trouble shooting guide ..

Otherwise, Power Supply I would suspect .. need a volt meter probably to check ..

 

[TaGosa]

I tried at least 10 times to switch off and on. I also tried another power point, but still no joy. I checked power point and found it working.

So I disconnected all POE cameras, ethernet, hdmi, mouse, power etc so that I can open it check power supply. Now before opening, I thouht I will check once more and this time it worked. I powered it off, reconnected all cameras, mouse, hdmi, etc, switched it on. It still worked.

This was my first outage in 5 years. I have been very happy with the cameras and NVR. They have worked without any outage (except this one), in heat, cold, etc. Also, I'm glad I bought these from Andy. He messaged me and offered me a quick replacement with some discount included as well. I appreciate his effort to help me.

For now, I will keep using this NVR.

Thanks you mat200 for suggestion of checking power supply.

 

[kobebeef]

NVR5216-16P-I/L