Replacement Parts [DS-2CD2132-I]

K

Karol Perkowski

n3wb
Apr 27, 2015
29
0
Hello Everyone,

I recently had a bunch of rain get into my POE ethernet connectors for my DS-2CD2132-I camera's. I was able to power the camera up with a 12volt power supply. However the ethernet seems to be dead.

Has anyone here seen a store online that sells parts for these camera's? I'm looking to also replace the lens as it has hard water stains on it.

Thanks,

Karol.
 
Karol Perkowski said:
Hello Everyone,

I recently had a bunch of rain get into my POE ethernet connectors for my DS-2CD2132-I camera's. I was able to power the camera up with a 12volt power supply. However the ethernet seems to be dead.

Has anyone here seen a store online that sells parts for these camera's? I'm looking to also replace the lens as it has hard water stains on it.

Thanks,

Karol.
Click to expand...
Here is the pinout for the ethernet, http://www.ipcamtalk.com/showthread...r-of-Ethernet-wires-required?highlight=pinout
Simply attach a an ethernet punchdown jack....
You wont find these replacement parts for sale...
 
!fenderman - Cool. I guess I need a junction box now. These two camera's are mounted on the brick chimney. Both have suffered the same result.

I'm now prompted to check the others. They are under the soffit but still worth the check.
 
Karol Perkowski said:
!fenderman - Cool. I guess I need a junction box now. These two camera's are mounted on the brick chimney. Both have suffered the same result.

I'm now prompted to check the others. They are under the soffit but still worth the check.
Click to expand...
What were the connections wrapped in?
If you use a junction box, make sure to make a small hole at the bottom so that water can escape as most will not stay water tight...
 
My own fault. Just plain jane electrical tape.

Yeah I know about the hole. I was just trying to get these up quick and not have a box on the or near the chimney.
 
You must log in or register to reply here.
Top Bottom