looney2ns
IPCT Contributor
Courtesy of @EMPIRETECANDY we have this cam to look over. It's a beast of a bad boy.
Please keep this thread on topic!
Note, This camera requires POE++ to operate, it will NOT work on a simple POE+ power supply.
Such as this one. or with a POE++ 60watt rated switch.
It would also be recommended that you use AWG23 sized ethernet cable, if the run would be more than 50ft.
No CCA cable, flat cable or other such nonsense.
I originally thought I would mount this puppy on my 2nd story roof, but the size and weight of it when it arrived changed my mind.
So it's mounted on my fence instead. Google maps says that it is 638ft from the mounting point to the stop sign you will see in the videos.
A couple of notes:
Shipping Firmware used is V2.820.0000019.0.R, Build Date: 2022-08-05
Just like in the other cameras using this new Web5.0 gui, the day/night change over does not work if you have the time set to 12hrs.
Can't change day to night with the API either.
The Web5.0 still sucks.
I've not had any real issues with it besides the day/night change over issue other than once or twice IVS rules would stop working after a time. But that has seemed to clear up after a couple of factory defaults.
On with some pictures.
Installation pics.
You hang the cam with the tether, then set the main part of the camera into the hing you see. Then rotate the cam up and tighten four screws on the dome to secure it.
SD card and reset are located in the removable panel on the back of main camera assembly.
See next page.
Please keep this thread on topic!
| Image Sensor | 1/1.2" CMOS |
| Pixel | 8 MP |
| Max. Resolution | 3840 (H) × 2160 (V) |
| ROM | 8 GB |
| RAM | 4 GB |
| Electronic Shutter Speed | 1/1 s–1/30,000 s |
| Scanning System | Progressive |
| Min. Illumination | Color: 0.0005 lux@F1.5 B/W: 0.0001 lux@F1.5 0 lux (Illuminator On) |
| Illumination Distance | 80 m (262.47 ft) (Only White Light) 250 m (820.21 ft) (Only IR) |
| Illuminator On/Off Control | Zoom Prio; Manual; Smart IR; Off |
| Illuminator Number | 10 (Dual light fusion) |
| Wiper | Yes |
| IVS (Perimeter Protection) | Tripwire; intrusion; climbing fences; loitering detection; abandoned/missing object; fast moving; parking detection; people gathering; vehicle/human alarm classification; linkage tracking |
| Auto Tracking | Yes |
| SMD | SMD Plus |
Such as this one. or with a POE++ 60watt rated switch.
It would also be recommended that you use AWG23 sized ethernet cable, if the run would be more than 50ft.
No CCA cable, flat cable or other such nonsense.
I originally thought I would mount this puppy on my 2nd story roof, but the size and weight of it when it arrived changed my mind.
So it's mounted on my fence instead. Google maps says that it is 638ft from the mounting point to the stop sign you will see in the videos.
A couple of notes:
Shipping Firmware used is V2.820.0000019.0.R, Build Date: 2022-08-05
Just like in the other cameras using this new Web5.0 gui, the day/night change over does not work if you have the time set to 12hrs.
Can't change day to night with the API either.
The Web5.0 still sucks.
I've not had any real issues with it besides the day/night change over issue other than once or twice IVS rules would stop working after a time. But that has seemed to clear up after a couple of factory defaults.
On with some pictures.
Installation pics.
You hang the cam with the tether, then set the main part of the camera into the hing you see. Then rotate the cam up and tighten four screws on the dome to secure it.
SD card and reset are located in the removable panel on the back of main camera assembly.
See next page.
Last edited:
As an Amazon Associate IPCamTalk earns from qualifying purchases.
