correct, from the Dahua ToolboxLet me check if have any way to bring it back. You are using VDP configure tool to make the update ?
correct, from the Dahua ToolboxLet me check if have any way to bring it back. You are using VDP configure tool to make the update ?
yes, can be ok. We have it.DH_VTO2202F_MultiLang_PN_SIP_V4.410.0000000.4.R.20200221
DH_VTHX421H_MultiLang_SIP_V4.410.0000000.4.R.20200221
are what I used from the Dahua website. Be Wary
was thinking of getting 4 or 5 of the VTH's put around the house (1 in each bedroom, kitchen, garage workshop). Can I purchase just the VTH's themselves?
We tested all firmware before releasing, you know we brick it, it's very easy to fix up.luckily, was just a $75-$80 mistake instead of $200 IP camera mistake. Lessons learned.
keep in mind that here you get to see the doorbell view as if it was ordinary IPC. it's not. many times the location for the doorbell is 90 degrees to the door and you have a situation of very short distance and a need of a very wide view. it would alway cause fish eye.Wow, that cam has a bad case of fish eye.
Other than individually disabling them, none that I've seen.Is there any voice over template to change the messages?
All available separately.this unit looks great... but would want to go with the flush mount kit.
also, dont really need the poe switch, or the extra monitor.
That could be accomplished with BI.would love to slap in the HAL 2001 movie voice
All available separately.
I initially asked Andy how these items were sold. He told me he only sells as a kit to get the VTO. So that means I had to buy 1 VTO, 1 VTH, 1 Poe switch (which I am thinking to donating to someone here as I have no need for it). However once you buy the kit you can buy as many VTH monitors. I myself will have 3 VTH's.last time i checked andy only sold it as a kit
My benchtop evaluation setup has the same problem with constant "Network abnormal monitor failure!" errors. Always happens from Digital VTH when attempting Monitor -> Door -> Main VTO -> "Play". Rebooting does not fix this error.Received my kit today. Tried to do a fast quick setup. That little piece of paper gave me a headache. May try again tomorrow to read more slowly.
I think I have the config stuff setup right except when I try to monitor the VTO, it says "network abnormal monitor failure". So maybe config is not right. Ug.
Tried to find a video on setting this thing up... only 1 YouTube video was found. DIdn't help much. Ah well...will try again tomorrow.
VTH version is : 20191209 v4.400.0000000.7.R
VTO version is: 2020-02-21 V4.410.0000000.4.R Security Baseline Version: v2.0
I can log into the VTO and see the livestream camera image, so at least I know the camera works