RJ-45 repair on NSC-208-BT camera

[DaveGris]

Hi all, I am trying to repair/replace the RJ-45 connector on a NSC-208-BT camera from Nelly’s Security. I’ve seen their YouTube videos. However on cutting the connector off and stripping the outer jacket I’ve discovered 4 twisted pairs of odd color.
The pairs are:
1. Orange/yellow
2. Purple/gray
3. Brown/white
4. Blue green
Can anyone help me with a pinout diagram?
I plan to use a male RJ-45 on the camera and a female to female connector to me Ethernet line going to the NVR.
Thanks!!

 

[TonyR]

I plan to use a male RJ-45 on the camera and a female to female connector to me Ethernet line going to the NVR.

Sorry I have no suggestion regarding the proper connection of the color code you have BUT I do have a question:

Why would you put a male RJ-45 on the camera pigtail and NOT a female? The female to female coupler (that couples 2 males together) introduces another possible point of failure, is bulky and will be one more thing you'll need to protect from corrosion....just my 2 cents.

 

[alastairstevenson]

However on cutting the connector off and stripping the outer jacket I’ve discovered 4 twisted pairs of odd color.

Presumably some / all of the wires to the damaged RJ45 female connector still exist - so you can determine what pins some / all of the wires connect to?

 

[TonyR]

I think I found it for you, as posted by @watech89 ==>> Hikvision camera cable pinout

Note that the included image (reproduced below) is a RJ-45 female but is drawn correctly. Good luck!