Is there a replacement part or the female rj 45 port? Or at least info/pinouts on how to repair port?
SD49225T-HN RJ45 Port replacement?
- Thread starter dalepa
- Start date
-
- Tags
- port repair sd49225t-hn
Barboots
Pulling my weight
I haven't replaced one on a PTZ, but if it is like other Dahua cameras, the pinout is probably as described here: IPC-HDW5231R-Z - Pinout SOLVED, yet not....
I have used this pinout successfully with an IPC-HFW4431R-Z (4MP varifocal) by wiring it into an RJ45 keystone jack. It is a bit tricky since Dahua uses thin stranded wires internally which isn't easy to work with. I used a little solder to help keep a good connection.
Note that there are 8 pins but only 6 wires in the camera to connect to them. This is intentional.
Take this with a grain of salt; you can look around elsewhere and find different pinouts claimed to work with different cameras. The only way to be 100% sure without just trying it would be to cut the end off with a little extra cable so you can use a multimeter to perform continuity tests between the wires and the pins.
| Dahua Wire Color | RJ45 Pin # | T568B Color |
|---|---|---|
| brown | 1 | orange/white |
| purple | 2 | orange |
| orange | 3 | green/white |
| yellow | 4 | blue |
| yellow | 5 | blue/white |
| blue | 6 | green |
| gray | 7 | brown/white |
| gray | 8 | brown |
I have used this pinout successfully with an IPC-HFW4431R-Z (4MP varifocal) by wiring it into an RJ45 keystone jack. It is a bit tricky since Dahua uses thin stranded wires internally which isn't easy to work with. I used a little solder to help keep a good connection.
Note that there are 8 pins but only 6 wires in the camera to connect to them. This is intentional.
Take this with a grain of salt; you can look around elsewhere and find different pinouts claimed to work with different cameras. The only way to be 100% sure without just trying it would be to cut the end off with a little extra cable so you can use a multimeter to perform continuity tests between the wires and the pins.
Traced it out and it appears that the
SD49225T-HN uses T-568B pinout. Even the colors match.
SD49225T-HN uses T-568B pinout. Even the colors match.
What the heck. Are those butt connectors waterproof? So essentially you've hard-wired a long physical cable to the camera.
The camera female port was damaged, had to be replaced. Will use shrink tube to seal.
These connectors also have oil in them when you clamp them the seal is encased in the oil. pretty nice product.
I've never used these butt connectors however they worked well with the small distance I had to deal with and also the stranded small wire. I could have solder.however these don't require stripping and are easy to attach.
Last edited:
alastairstevenson
Staff member
In what way are they different?
Needing all 4 pairs presumably?
The terminals on the old cable would be removed from the connectors, and the terminals on the new cable inserted into the connectors in their place.