No power is a real limitation. It rules out 24 hour recording. Your recording will be limited to when a PIR or laser line indicates a trespasser.
To have video when an injury occurs? Are you trying to stop job site thefts? And then alert the police? Real-time security is tricky - check out videos by
@bababouy. Human monitoring is effective, tho expensive.
When I was new to ipcam systems, I looked into a camera and alarm system for small construction sites. I did a search for the threads, results below.
I will be building a home later this year. I would like to keep an eye on the build as much as possible, but am not sure what my options are. It is in a rural location and currently just a piece of dirt. I won’t have an internet until the build is complete. Power is another challenge too. I...
ipcamtalk.com
All, I’m setting up a “Job Site Security System” for use by a General Contractor (GC) who does single family residential remodel projects. Each setup is temporary, for the duration of the project. 3 to 12 months long. The GC wants to surf in during the day, and check on progress. At...
ipcamtalk.com
My remote system will only be connected via a cellular modem. I need to be able to surf in with a browser and see live video. Therefore, the cellular modem must be always connected (to Verizon) So far, this works fine. However, I'm consuming my data plan too quickly. Cellular data can be...
ipcamtalk.com
All, I'm putting together a camera/security system for residential remodeling job sites. The system will be semi-portable, and will move from job to job as remodels get completed. The General Contractor (GC) said we can use the homeowner's broadband connection. I'm learning about the many...
ipcamtalk.com
Has anyone set up a camera and NVR system for job site monitoring? My friend just had $15,000+ worth of stuff stolen from his construction site. I'd like to see if I can put something fairly simple together for him to use from job site to job site.
ipcamtalk.com
Hi all, I am new to the forum and also to the CCTV world. I have a good background in networking and electronics. I specialise in wireless communications and RF by trade. I have a question on directly accessing multiple cameras located on 1 site without a NVR. I will have up to 3 cameras on...
ipcamtalk.com
I have a farm that just keeps being invaded. Im purchasing from a family member and he has had so much stolen there. It is only accessible from one road. Has cliffs around most of it. There is no electricity there at the moment and no Wi-Fi. It has a buried fiber optic cable run through the...
ipcamtalk.com
Good luck! If follow-on questions, plz elaborate on your objectives.
Fastb