Thank You very much. I can not stop the booting process eventhoúgh I send a lot of stars
UBL Version: 1.46t(DM365)09:30:17 Sep 2 2014
Oscillator: 24MHZ
ARM Rate: 432 MHZ
DDR Rate: 340 MHZ
BootMode: SPI
Starting SPI Memory Copy...
DONE
U-Boot 1.3.6 (jerry) (Sep 2 2014 - 09:44:01)
DRAM: 128 MB
SF: Got idcode c2 20 18 c2 20
In: serial
Out: serial
Err: serial
Ethernet PHY: GENERIC @ 0x05,id:221513
total gio 2
gio[22]=1
gio[25]=1
davinci_eth_open:no link
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: WARN: emac_send_packet: No link
*
Retry count exceeded; starting again
Fail to get info file!
Init error!
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
*oading: *
Retry count exceeded; starting again
==>use default images
..*..
## Booting kernel from Legacy Image at 80007fc0 ...
Image Name: Linux-2.6.18_pro500-davinci_evm-
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1685312 Bytes = 1.6 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... OK
XIP Kernel Image ... OK
OK
Starting kernel ...
.......................................... done, booting the kernel.
*
# *5**5*5*5*55*5**5*5*5*55*5***********************************************
Checking DDR......OK
UBL Version: 1.46t(DM365)09:30:17 Sep 2 2014
Oscillator: 24MHZ
ARM Rate: 432 MHZ
DDR Rate: 340 MHZ
Bo▒tMode: SPI
Starting SPI Memory Copy...
***DONE
U-Boot 1.3.6 (jerry) (Sep 2 2014 - 09:44:01)
DRAM: 128 MB
SF: Got idcode c2 20 18 c2 20
*In: serial
Out: serial
Err: serial
*Ethernet PHY: GENERIC @ 0x05,id:221513
*total gio 2
gio[22]=1
gio[25]=1
********************************************************************************************davinci_eth_open:no link
TF*▒ from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'upgrade_info_7db780a713a4.txt'.
Load address: 0x80100000
Loading: WARN: emac_send_packet: No link
*****************************
Retry count exceeded; starting again
Fail to get info file!
Init error!
********************************************************************************************davinci_eth_open:no link
TFTP from server 192.168.254.254; our IP address is 192.168.1.108; sending through gateway 192.168.1.1
Filename 'failed.txt'.
Load address: 0x80200000
Loading: WIYN: emac_send_packet: No link
****************************
Retry count exceeded; starting again
==>use default images
****.*****.****.****.****.****.****.
## Booting kernel from Legacy Image at 80007fc0 ...
Image Name: Linux-2.6.18_pro500-davinci_evm-
Image Type: ARM Linux Kernel Image (un#empressed)
Data Size: 1685312 Bytes = 1.6 MB
Load Address: 80008000
Entry Point: 80008000
Verifying Checksum ... *************OK
XIP Kernel Image ... OK
OK
Starting kernel ...
Uncompressing Linux...*......*.....*.....*.....*.....*.....*.....*......*....*.....*.....*.....*.....*.....*.....*.....R▒.....*......*.......*.....*....... done, booting the kernel.
******
# *5*5