Hi
Just wondered if you managed to progress any further with the SNMP. I managed to connect and do an snmpwalk on my camera but without any documentation I can only guess as to the output which is as follows:
.1.3.6.1.4.1.39165.1.1.0 = STRING: "DS-2CD2132-I"
.1.3.6.1.4.1.39165.1.2.0 = STRING: "0"
.1.3.6.1.4.1.39165.1.3.0 = STRING: "V5.2.0 build 140721"
.1.3.6.1.4.1.39165.1.4.0 = STRING: "8c-e7-48-f9-70-52"
.1.3.6.1.4.1.39165.1.5.0 = STRING: "88"
.1.3.6.1.4.1.39165.1.6.0 = STRING: "Hikvision"
.1.3.6.1.4.1.39165.1.7.0 = STRING: "12 PERCENT"
.1.3.6.1.4.1.39165.1.8.0 = STRING: "0.0 GB"
.1.3.6.1.4.1.39165.1.9.0 = STRING: "0 PERCENT"
.1.3.6.1.4.1.39165.1.10.0 = STRING: "256 MB"
.1.3.6.1.4.1.39165.1.11.0 = STRING: "96 PERCENT"
.1.3.6.1.4.1.39165.1.12.0 = INTEGER: 0
.1.3.6.1.4.1.39165.1.13.0 = IpAddress: 0.0.0.0
.1.3.6.1.4.1.39165.1.14.0 = IpAddress: 0.0.0.0
.1.3.6.1.4.1.39165.1.15.0 = IpAddress: 0.0.0.0
.1.3.6.1.4.1.39165.1.16.0 = IpAddress: 192.168.85.94
.1.3.6.1.4.1.39165.1.17.0 = IpAddress: 255.255.255.0
.1.3.6.1.4.1.39165.1.18.0 = IpAddress: 192.168.85.10
.1.3.6.1.4.1.39165.1.19.0 = STRING: "2014-05-15 14:39:44"
.1.3.6.1.4.1.39165.1.20.0 = INTEGER: 1
.1.3.6.1.4.1.39165.1.21.0 = STRING: "H.264"
.1.3.6.1.4.1.39165.1.22.0 = STRING: "MJPEG"
.1.3.6.1.4.1.39165.1.23.0 = INTEGER: 0
.1.3.6.1.4.1.39165.1.24.0 = INTEGER: 0
.1.3.6.1.4.1.39165.1.25.0 = INTEGER: 0
.1.3.6.1.4.1.39165.1.26.0 = INTEGER: 1
.1.3.6.1.4.1.39165.1.27.0 = INTEGER: 1
.1.3.6.1.4.1.39165.1.28.0 = INTEGER: 1
.1.3.6.1.4.1.39165.1.29.0 = STRING: "WIRED ETHERNET"
.1.3.6.1.4.1.39165.1.30.0 = INTEGER: 0
.1.3.6.1.4.1.39165.1.31.0 = INTEGER: 0
.1.3.6.1.4.1.39165.1.32.0 = IpAddress: 0.0.0.0
.1.3.6.1.4.1.39165.1.33.0 = ""
.1.3.6.1.4.1.39165.1.34.0 = INTEGER: 0
.1.3.6.1.4.1.39165.1.34.0 = No more variables left in this MIB View (It is past the end of the MIB tree)
What I am trying to do, unsuccessfully, is receive an SNMP trap each time motion is detected. I've configured the trap and believe it is working as if I query the device with an invalid community string I see the following output to the trap log on the server:
5#011iso.3.6.1.6.3.1.1.4.3.0 = OID: iso.3.6.1.4.1.39165.3.2.10
Sep 18 09:42:04 openremote snmptrapd[6035]: 2014-09-18 09:42:04 192.168.85.94 [UDP: [192.168.85.94]:52125->[192.168.85.22]]:#012iso.3.6.1.2.1.1.3.0 = Timeticks: (6011162) 16:41:51.62#011iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.6.3.1.1.5.5#011iso.3.6.1.6.3.1.1.4.3.0 = OID: iso.3.6.1.4.1.39165.3.2.10
Sep 18 09:42:05 openremote snmptrapd[6035]: 2014-09-18 09:42:05 192.168.85.94 [UDP: [192.168.85.94]:40755->[192.168.85.22]]:#012iso.3.6.1.2.1.1.3.0 = Timeticks: (6011263) 16:41:52.63#011iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.6.3.1.1.5.5#011iso.3.6.1.6.3.1.1.4.3.0 = OID: iso.3.6.1.4.1.39165.3.2.10
Sep 18 09:42:06 openremote snmptrapd[6035]: 2014-09-18 09:42:06 192.168.85.94 [UDP: [192.168.85.94]:47600->[192.168.85.22]]:#012iso.3.6.1.2.1.1.3.0 = Timeticks: (6011362) 16:41:53.62#011iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.6.3.1.1.5.5#011iso.3.6.1.6.3.1.1.4.3.0 = OID: iso.3.6.1.4.1.39165.3.2.10
Sep 18 09:42:07 openremote snmptrapd[6035]: 2014-09-18 09:42:07 192.168.85.94 [UDP: [192.168.85.94]:50369->[192.168.85.22]]:#012iso.3.6.1.2.1.1.3.0 = Timeticks: (6011463) 16:41:54.63#011iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.6.3.1.1.5.5#011iso.3.6.1.6.3.1.1.4.3.0 = OID: iso.3.6.1.4.1.39165.3.2.10
Sep 18 09:42:08 openremote snmptrapd[6035]: 2014-09-18 09:42:08 192.168.85.94 [UDP: [192.168.85.94]:40849->[192.168.85.22]]:#012iso.3.6.1.2.1.1.3.0 = Timeticks: (6011563) 16:41:55.63#011iso.3.6.1.6.3.1.1.4.1.0 = OID: iso.3.6.1.6.3.1.1.5.5#011iso.3.6.1.6.3.1.1.4.3.0 = OID: iso.3.6.1.4.1.39165.3.2.10
Upon reading the manual it seems to imply that ticking the motion detection option to "Notify Surveillance Center" should trigger the SNMP event. I've enabled both this and the email notification and am successfully receiving email notifications but no SNMP event.
Any help would be appreciated. I tried calling HikVision but they seemed to be out of their depth.
Thanks
Steve