Stop analyzing when confirmed

[IconBycon]

I'm trying to get the AI settings to stop analyzing if one of the "To confirm" objects is found.

The way it works now is, it keeps checking each of the post trigger images, no matter what, and that is wasting time and resources in my case.

Is there a way to achieve what I need?

 

[Bruce_H]

If you click the help button you will find this tidbit

Hot objects may be specified in the to confirm box to immediately confirm the alert and
then cancel any outstanding analyses. For this, the confidence must begin with a 0, such as
person:0 or person:080.

 

[OSU_BuckeyesFan]

If you click the help button you will find this tidbit

Hot objects may be specified in the to confirm box to immediately confirm the alert and
then cancel any outstanding analyses. For this, the confidence must begin with a 0, such as
person:0 or person:080.

So if person:080 is in the to confirm box, once it has 80% confidence that it truly is a person, all the rest of the analyses? What about the min confidence % box, how is this still used?

 

[Bruce_H]

I only know what is in the help file, which is were I always look initially, but I would think that the person:080 would override that setting, but that is just an educated guess on my part!

 

[IconBycon]

I'll give it a test, and report soon.

Thanks!

 

[IconBycon]

If you click the help button you will find this tidbit

Hot objects may be specified in the to confirm box to immediately confirm the alert and
then cancel any outstanding analyses. For this, the confidence must begin with a 0, such as
person:0 or person:080.

So I tried what you suggested and it seems to work great...
But only on some of the cameras, and on some cameras it did make any difference and it behaved like before.

I'm seeing all this in the AI analysis.

There must be something or a prerequisite that needs to be in place, that is not allowing this to work, just can't figure out what it is.

Any ideas are welcomed.

 

[OSU_BuckeyesFan]

This made a big difference in PushOver notifications, with testing this afternoon I'm now getting my mobile notifications in 1-3 seconds.

 

[IconBycon]

As you can see in the highlighted, I set the confirm to person:080
however, even though it was confirmed @ T-2565 and many times after, it kept analyzing until T+933

Any idea how to make it stop analyzing when confirmed?

 

[OSU_BuckeyesFan]

As you can see in the highlighted, I set the confirm to person:080
however, even though it was confirmed @ T-2565 and many times after, it kept analyzing until T+933

Any idea how to make it stop analyzing when confirmed?

Your using ipcam-combined and ipcam-dark, what are you trying to detect? I use ipcam-general and seems to work well for people and vehicles. I would also lower your post-trigger images and see if that helps.

 

[IconBycon]

Your using ipcam-combined and ipcam-dark, what are you trying to detect? I use ipcam-general and seems to work well for people and vehicles. I would also lower your post-trigger images and see if that helps.

The weird thing is, I have the same setup with ipcam-combined and ipcam-dark on other cameras, with even more post-trigger images (which are very much needed) and it works great and stops when confirmed.

 

[Christikfa]

Interesting, im testing this at the moment and its only stopping after the first "person" detection if i use ipcam-general. The second i switch to Dark or combined its scanning more images.

Im using person:060 in the to confirm box.