I appear to have burned up two Linksys AC1900 routers in the last 18 hours after connecting my camera system. Both times the Internet has gone down, I lose control of my home automation system, and I no longer log into my router using IP. I can still see the connection lights and traffic on each Cat5 cable.
Here is my set up:
1. Linksys AC1900 router - the computer running BI, a Netgear Prosafe 16 ch switch (8 poe), and a cable that runs into my structured wiring box to provide Internet to the rest of the house are plugged in.
2. Netgear Prosafe JGS516PE - there are 3ea Hikvision DS-2CD2T42WD-I5 camera and 1ea DS2CD2142FWD-IS cameras plugged into the PoE ports.
Everything was running fine, all cameras were running in BI. Now nothing....
What could be zapping routers? Help please!
Sent from my SAMSUNG-SM-G920A using Tapatalk
Here is my set up:
1. Linksys AC1900 router - the computer running BI, a Netgear Prosafe 16 ch switch (8 poe), and a cable that runs into my structured wiring box to provide Internet to the rest of the house are plugged in.
2. Netgear Prosafe JGS516PE - there are 3ea Hikvision DS-2CD2T42WD-I5 camera and 1ea DS2CD2142FWD-IS cameras plugged into the PoE ports.
Everything was running fine, all cameras were running in BI. Now nothing....
What could be zapping routers? Help please!
Sent from my SAMSUNG-SM-G920A using Tapatalk