hello,
i recently purchased an active deterrence cam(ipc-t5541h-as-pv) from Andy to add to my set up and I've just found out that there's a whole bunch of settings which can only be changed directly in the camera, i have it hooked up to my NVR (5416-4KS2). I've managed to access my older cameras without issue through the NVR web browser but for some reason i can't access this newer camera through the same way (port 5, 10.1.1.69).
I've tried deleting it from the list and reconnecting into different ethernet ports, resetting the nvr ect. but it comes up with the same error. it does seem to always designate the address as 10080 so i'm not really sure how to clear or reset this path if that is the problem.
thanks in advance


i recently purchased an active deterrence cam(ipc-t5541h-as-pv) from Andy to add to my set up and I've just found out that there's a whole bunch of settings which can only be changed directly in the camera, i have it hooked up to my NVR (5416-4KS2). I've managed to access my older cameras without issue through the NVR web browser but for some reason i can't access this newer camera through the same way (port 5, 10.1.1.69).
I've tried deleting it from the list and reconnecting into different ethernet ports, resetting the nvr ect. but it comes up with the same error. it does seem to always designate the address as 10080 so i'm not really sure how to clear or reset this path if that is the problem.
thanks in advance

