Considering getting one of these. By thermal alarms, do you mean triggers or the alarm on the contacts? Does thermal motion detection work?... you can't use thermal alarms...
Thanks,
K.
Considering getting one of these. By thermal alarms, do you mean triggers or the alarm on the contacts? Does thermal motion detection work?... you can't use thermal alarms...
Is this the same one you are talking about by any chance?I'm just hoping my little Flir TCX doesn't die because there is nothing available for the price those went for (before they were discontinued).
TPC-BF2120 This oneIs this the same one you are talking about by any chance?
https://www.amazon.com/Thermal-Tri-Mode-Bullet-Camera-Degree/dp/B00V5B4UG8/ref=pd_lpo_sbs_421_t_1?_encoding=UTF8&psc=1&refRID=E93AWZCXY5WXKYEJXEQE
$533 is the current price.
Yes, before that cam was discontinued it was available for $200-250 through lorex, and even then it was not well liked because it is such a glitchy and low resolution sensor (80 x 60 pixels) and they intentionally crippled the firmware so it would not compete as much with higher cost versions. I couldn't even convince myself to buy a second one at the lower price, so there's simply no way I would pay $533 for one.Is this the same one you are talking about by any chance?
https://www.amazon.com/Thermal-Tri-Mode-Bullet-Camera-Degree/dp/B00V5B4UG8/ref=pd_lpo_sbs_421_t_1?_encoding=UTF8&psc=1&refRID=E93AWZCXY5WXKYEJXEQE
$533 is the current price.
How come they didn't release a follow-up camera to the TCX? Or is the BF2120 the follow-up? There should be something in the $300 to $400 range I would think.Yes, before that cam was discontinued it was available for $200-250 through lorex, and even then it was not well liked because it is such a glitchy and low resolution sensor (80 x 60 pixels) and they intentionally crippled the firmware so it would not compete as much with higher cost versions. I couldn't even convince myself to buy a second one at the lower price, so there's simply no way I would pay $533 for one.
We should contact them as a huge forum and let them know that the discontinued product line is not acceptable to us. We need lower cost thermal, d*** it!I was holding out for a gen2 with their 160x120 sensor and industry-standard thermal image configuration options, but it never came and they just discontinued the product line instead.
Did you git it, did you git it? If you didn't git it yet, is it still on the way? ETA?purchased one ... waiting for it
BICK
Did you git it?always waiting for it
BICK