After running coreinfo it appears this CPU does not support AVX, perhaps that was my initial issue masked by the port overlap. I will set up on a different machine and report back.go to the first post in this thread and have a look at the troubleshooting section, I added it just yesterday and there your problem is described (deepstack silently crashed).
If you confirmed that Deepstack silently crashed you can eigther try to resolve thr problem in accordance with the Windows log, or just install the Docker version.Everything installed and setup
windows version of deepstack
did the deepstack troubleshoot and it is running
cpu does support avx
I can access deepstack with localhost:83 in browser
always errors:
[12.06.2020, 15:27:51.244]: Starting analysis of V:\cam\aiinput/RWsd.20200612_152440844.jpg
[12.06.2020, 15:27:51.261]: (1/6) Uploading image to DeepQuestAI Server
[12.06.2020, 15:29:31.289]: System.Threading.Tasks.TaskCanceledException | A task was canceled. (code: -2146233029 )
[12.06.2020, 15:29:31.300]: ERROR: Processing the following image 'V:\cam\aiinput/RWsd.20200612_152440844.jpg' failed. Can't reach DeepQuestAI Server at localhost:83.
You have to use the same port which gives you access to Blue Iris UI3, are you sure it's port 21432?I keep getting a login screen using the large url. I have turned off login for all connections and that still doesn't work. I'm not sure why I'm getting this login screen. What's worse is when I try to login with he login screen it just pops up the same login screen again. It's an endless cycle.
With 1.67 you can integrate different placrholders in the URL (p.e. [summary] which will be replaced by the detection + confidence. If you trigger something that allows url processing, you could then differentiate.Alerts on phone:
To be comfort I need to get different PUSH sounds on phone for different detected objects for the same camera.(if there is a cat i even not look for the push event)
Now i need to have 3 duplicates to get this:
BEEP BEEP if detected car
VUIP if detected person
MIAU if detected cat
Is there better option to get different push sounds with one duplicate.
(I use win10 and AItool1,65)
Yes I’m sure that’s the custom port I’m using.You have to use the same port which gives you access to Blue Iris UI3, are you sure it's port 21432?
@gentle PumpkinFeature requests:
MASK the area where CAR is parked is not ok, because when there is no CAR on that area nothing is detected then. MASKshould be use only to eliminate permanent objects, like trees, neighbour area.
It would be nice that program would compare the picture before and eliminate fixed detected objects allready known.(or automask for the time it is stil there)
(othervise someone come on coffee and park car outside and then after 5 minutes come person and i get that there come person and a car)
AItool detected 2 persons and false detected car[13.06.2020, 16:29:10.058]: Done.
[13.06.2020, 16:29:10.064]: 1 - 217, 111, 316, 356
[13.06.2020, 16:29:10.070]: Done.
[13.06.2020, 16:29:10.076]: 2 - 482, 29, 539, 120
[13.06.2020, 16:29:10.082]: Done.
[13.06.2020, 16:29:10.088]: 3 - 1243, 503, 1908, 1075
[13.06.2020, 16:29:10.095]: Done.
[13.06.2020, 16:29:13.093]: Loading object rectangles...
[13.06.2020, 16:29:13.097]: 0 - 801, 199, 888, 408
[13.06.2020, 16:29:13.103]: Done.
[13.06.2020, 16:29:13.108]: 1 - 204, 107, 337, 357
[13.06.2020, 16:29:13.114]: Done.
[13.06.2020, 16:29:13.118]: 2 - 1241, 501, 1909, 1077
[13.06.2020, 16:29:13.123]: Done.
[13.06.2020, 16:29:14.626]: Loading object rectangles...
[13.06.2020, 16:29:14.631]: 0 - 340, 105, 437, 341
[13.06.2020, 16:29:14.638]: Done.
[13.06.2020, 16:29:14.643]: 1 - 895, 215, 1006, 426
[13.06.2020, 16:29:14.648]: Done.
[13.06.2020, 16:29:14.652]: 2 - 1238, 502, 1906, 1076
[13.06.2020, 16:29:14.656]: Done.
[13.06.2020, 16:29:19.133]: Loading object rectangles...
[13.06.2020, 16:29:19.137]: 0 - 722, 105, 801, 334
[13.06.2020, 16:29:19.142]: Done.
[13.06.2020, 16:29:19.146]: 1 - 1288, 314, 1376, 558
[13.06.2020, 16:29:19.150]: Done.
[13.06.2020, 16:29:19.155]: 2 - 1238, 506, 1913, 1077
[13.06.2020, 16:29:19.162]: Done.
[13.06.2020, 16:29:20.652]: Loading object rectangles...
[13.06.2020, 16:29:20.658]: 0 - 1243, 502, 1908, 1078
[13.06.2020, 16:29:20.664]: Done.
EDIT::: I fixed the url trigger. I had an apparent / between admin/?trigger. It now works on the BI machine but still the same issue if I use other computer browsers. I am still getting errors in the log though.
Here's my setup: I have BI 5.2.9.17 on a windows server using windows 10 pro. That is assigned 200.200.200.0/24 LAN. I have a Synology NAS on 10.1.1.0/24 which is where a portioner is running Deepstack. Your AI tool is on the windows server in the same partion as BI.try the trigger url on the BI machine itself with the ip 127.0.0.1 and check if that works. Please check if secure session keys is disabled in BI Webserver->advanced. Otherwise this is a problem that occurs since BI 5.2.9 and probably has osmething todo with which network you defined as LAN in Blue Iris.
[13.06.2020, 11:32:57.319]: Starting analysis of S:\aiinput/lowersd.20200613_113257286.jpg
[13.06.2020, 11:32:57.333]: (1/6) Uploading image to DeepQuestAI Server
[13.06.2020, 11:32:57.359]: (2/6) Waiting for results
[13.06.2020, 11:32:57.373]: (3/6) Processing results:
[13.06.2020, 11:32:57.387]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[13.06.2020, 11:32:57.401]: ERROR: Processing the following image 'S:\aiinput/lowersd.20200613_113257286.jpg' failed. Failure in AI Tool processing the image.
[13.06.2020, 11:32:59.341]:
[13.06.2020, 11:32:59.355]: Starting analysis of S:\aiinput/homesd.20200613_113259315.jpg
[13.06.2020, 11:32:59.473]: System.IO.IOException | The process cannot access the file 'S:\aiinput\homesd.20200613_113259315.jpg' because it is being used by another process. (code: -2147024864 )
[13.06.2020, 11:32:59.487]: Could not access file - will retry after 10 ms delay
[13.06.2020, 11:32:59.525]: Retrying image processing - retry 1
[13.06.2020, 11:32:59.539]: (1/6) Uploading image to DeepQuestAI Server
[13.06.2020, 11:32:59.566]: (2/6) Waiting for results
[13.06.2020, 11:32:59.596]: (3/6) Processing results:
[13.06.2020, 11:32:59.610]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[13.06.2020, 11:32:59.624]: ERROR: Processing the following image 'S:\aiinput/homesd.20200613_113259315.jpg' failed. Failure in AI Tool processing the image.
Very interesting as I was previously having the same issue...which then morphed into your previous issue. What did you change between the two? I still have not figured mine out with the exception of AXV support, however I was previously able to get thru step 3/6 and generate the same nullreference error as you have above.Here's my setup: I have BI 5.2.9.17 on a windows server using windows 10 pro. That is assigned 200.200.200.0/24 LAN. I have a Synology NAS on 10.1.1.0/24 which is where a portioner is running Deepstack. Your AI tool is on the windows server in the same partion as BI.
I went ahead and added the url to the trigger just to see what happens. I get the following errors in the log:
[13.06.2020, 11:32:57.319]: Starting analysis of S:\aiinput/lowersd.20200613_113257286.jpg
[13.06.2020, 11:32:57.333]: (1/6) Uploading image to DeepQuestAI Server
[13.06.2020, 11:32:57.359]: (2/6) Waiting for results
[13.06.2020, 11:32:57.373]: (3/6) Processing results:
[13.06.2020, 11:32:57.387]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[13.06.2020, 11:32:57.401]: ERROR: Processing the following image 'S:\aiinput/lowersd.20200613_113257286.jpg' failed. Failure in AI Tool processing the image.
[13.06.2020, 11:32:59.341]:
[13.06.2020, 11:32:59.355]: Starting analysis of S:\aiinput/homesd.20200613_113259315.jpg
[13.06.2020, 11:32:59.473]: System.IO.IOException | The process cannot access the file 'S:\aiinput\homesd.20200613_113259315.jpg' because it is being used by another process. (code: -2147024864 )
[13.06.2020, 11:32:59.487]: Could not access file - will retry after 10 ms delay
[13.06.2020, 11:32:59.525]: Retrying image processing - retry 1
[13.06.2020, 11:32:59.539]: (1/6) Uploading image to DeepQuestAI Server
[13.06.2020, 11:32:59.566]: (2/6) Waiting for results
[13.06.2020, 11:32:59.596]: (3/6) Processing results:
[13.06.2020, 11:32:59.610]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[13.06.2020, 11:32:59.624]: ERROR: Processing the following image 'S:\aiinput/homesd.20200613_113259315.jpg' failed. Failure in AI Tool processing the image.
No, it did not false detect the cars because there are two cars. If you don't want to get the cars detected, don't set them as relevant objects. Then you don't need a mask aswell.@gentle Pumpkin
2 children are playing in the yard and there are parked 2 cars
Everytime i get 1 or 2 person and the same car.
But info for car position we allready have from previous detection.
it would be cool that Aitool looked previous snapshot rectangles position and if on new snapshot are detections almost on the same position, it should ignore them.(it differs for no more then 5 for each rectangle position limit number
AItool detected 2 persons and false detected car
View attachment 63693
If you run AI Tool on the same device, always use localhost or better 127.0.0.1 (which equals localhost, but seemingly is more reliable) and not the outside IP. It's as little faster and way more reliable.Here's my setup: I have BI 5.2.9.17 on a windows server using windows 10 pro. That is assigned 200.200.200.0/24 LAN. I have a Synology NAS on 10.1.1.0/24 which is where a portioner is running Deepstack. Your AI tool is on the windows server in the same partion as BI.
I went ahead and added the url to the trigger just to see what happens. I get the following errors in the log:
[13.06.2020, 11:32:57.319]: Starting analysis of S:\aiinput/lowersd.20200613_113257286.jpg
[13.06.2020, 11:32:57.333]: (1/6) Uploading image to DeepQuestAI Server
[13.06.2020, 11:32:57.359]: (2/6) Waiting for results
[13.06.2020, 11:32:57.373]: (3/6) Processing results:
[13.06.2020, 11:32:57.387]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[13.06.2020, 11:32:57.401]: ERROR: Processing the following image 'S:\aiinput/lowersd.20200613_113257286.jpg' failed. Failure in AI Tool processing the image.[/COLOR]
[13.06.2020, 11:32:59.341]:
[13.06.2020, 11:32:59.355]: Starting analysis of S:\aiinput/homesd.20200613_113259315.jpg
[13.06.2020, 11:32:59.473]: System.IO.IOException | The process cannot access the file 'S:\aiinput\homesd.20200613_113259315.jpg' because it is being used by another process. (code: -2147024864 )[
[/COLOR]
[COLOR=rgb(0, 0, 0)][13.06.2020, 11:32:59.487]: Could not access file - will retry after 10 ms delay
[13.06.2020, 11:32:59.525]: Retrying image processing - retry 1
[13.06.2020, 11:32:59.539]: (1/6) Uploading image to DeepQuestAI Server
[13.06.2020, 11:32:59.566]: (2/6) Waiting for results
[13.06.2020, 11:32:59.596]: (3/6) Processing results:
[13.06.2020, 11:32:59.610]: System.NullReferenceException | Object reference not set to an instance of an object. (code: -2147467261 )
[13.06.2020, 11:32:59.624]: ERROR: Processing the following image 'S:\aiinput/homesd.20200613_113259315.jpg' failed. Failure in AI Tool processing the image.
"Object reference not set to an instance of an object" in this case pretty much means "well, yes I've got a response from Deepquest. But eigther Deepquest changed our talk language to traditional chinese or fell asleep on his keyboard. Anyways, there is no useful information in the response."Very interesting as I was previously having the same issue...which then morphed into your previous issue. What did you change between the two? I still have not figured mine out with the exception of AXV support, however I was previously able to get thru step 3/6 and generate the same nullreference error as you have above.
Well I managed to get it working. Not 100% sure what I did. I installed 2 versions of Deepstack on the Synology but only the noavx worked. I get results in about 10-15secs but the occasionally 45-70secs.So far so good (EDIT: ok not good, but we'll fix this), check if Deepstack runs correctly and try to trigger Blue Iris from webbrowser on the PC blue iris runs on with 127.0.0.1 instead of the lan ip. And please keep us up to date how (fast) Deepstack runs on your Synology, I'm very interested
I had a similar issue as well.No, it did not false detect the cars because there are two cars. If you don't want to get the cars detected, don't set them as relevant objects. Then you don't need a mask aswell.
I did understand that you would like me to implement change detection. And I can assure you that I've been working towards this for a longer time, step by step adding the prerequisites. I do this in my freetime and as I've posted many times, my freetime is a scarce resource at the moment. So honestly, if the way AI Tool was programmed so far is "not ok" and everything "should" be different, don't blame me and switch to another solution.
I've always tried to make this program as useful as possible to everyone using it and I spent many many hours implementing features people asked for, making the gui easier to navigate and to understand, simplifying the initial setup, helping troubleshooting and so on. I'm very aware of the things that Could be better and I steadily work on them.
I mainly do that for you guys and I'm encouraged every time someone states his appreciatiation or constructively discusses ideas he has. Sadly, after reading some posts, I get the distinct feeling that whoever posted this takes all the efforts of many people who have contributed to this project for granted.