Trigger recording not working

wmborah

n3wb
Joined
Sep 14, 2014
Messages
4
Reaction score
0
Welcome to the forum. Show us an image of the record tab. Also increase your make time to something about 0.0....
Thank you for taking a look! Here is the record menu from the same camera:

Untitled.png
 

wmborah

n3wb
Joined
Sep 14, 2014
Messages
4
Reaction score
0
Any ideas for this issue?

My new system will not record after a trigger, even with "Object detect/reject" disabled. It will manual record just fine. I'm not new to Blue Iris, have setup another complete system that works perfectly.

I have three cameras: Foscam FI8918W, FI8910W and a DCS-930L.

None of the cameras will record, even though configuration menu shows Blue Iris has been triggered by motion. Below is one of the configurations:

Any ideas? I'm pulling my hair out over this!!! Thank you very much.

View attachment 1266
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
did you increase your make time from zero? Also check your traffic signal settings? what is the color? is recording set to disabled when red?
 

wmborah

n3wb
Joined
Sep 14, 2014
Messages
4
Reaction score
0
Solved... It was the traffic signal setting. It was set to red and as soon as I changed to green it started recording. Hadn't noti Thank you very much.
 
Top