I had an outdoor ICSEE Chinese PTZ camera that worked fine with Blue Iris-5. It was damaged by lightning so I bought a new one just like it thinking I would install it and keep going without a lot of hassle. Well it did install easily and works fine with one caveat. In Blue Iris it will no longer save or retrieve presets. The preset functions work with the ICSEE app and they also work with ONVIF Device Manager so apparently the camera is working. The old camera worked properly including the preset functions in Blue Iris. It uses ONVIF (OXML) for the PTZ protocol. The PTZ movement controls work, it just won't save or retrieve the presets however BI does report "the preset was saved successfully".
The only difference as far as I can tell is that the new camera has a later firmware version but since it is working with ONVIF Device Manager it must still be fairly ONVIF compatible. Perhaps whatever command Blue Iris sends for the preset functions is enough different from what ODM sends that the camera is not recognizing it?
Has anyone else run into this? Any solutions or ideas on how to fix it?
The only difference as far as I can tell is that the new camera has a later firmware version but since it is working with ONVIF Device Manager it must still be fairly ONVIF compatible. Perhaps whatever command Blue Iris sends for the preset functions is enough different from what ODM sends that the camera is not recognizing it?
Has anyone else run into this? Any solutions or ideas on how to fix it?