Unexptected Shutdown

[FIN13]

I have had several mornings where I wake up and see that the program shut down in the middle of the night. Not for disk space reasons. My understanding is that if I run this as a service that it will restart itself in case this happens?


Here is my error log. Looks like it lost signals, regained them and then later just had an unexpected shutdown, I guess just the software crashed. I restarted when I woke up after 8 am. Everything stopped recording after 3:32 AM




3 1/10/2015 3:06:12 AM WIN2 MOTION
1 1/10/2015 3:14:53 AM WIN1 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:14:55 AM WIN3 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:14:55 AM WIN2 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:15:03 AM WIN2 Signal: network retry
1 1/10/2015 3:15:03 AM WIN3 Signal: network retry
1 1/10/2015 3:15:03 AM WIN1 Signal: network retry
1 1/10/2015 3:15:11 AM WIN3 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:15:11 AM WIN2 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:15:23 AM WIN1 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:15:33 AM WIN1 Signal: network retry
1 1/10/2015 3:15:33 AM WIN2 Signal: network retry
1 1/10/2015 3:15:33 AM WIN3 Signal: network retry
1 1/10/2015 3:15:45 AM WIN3 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:15:47 AM WIN1 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:15:47 AM WIN2 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:16:03 AM WIN1 Signal: network retry
1 1/10/2015 3:16:03 AM WIN3 Signal: network retry
1 1/10/2015 3:16:03 AM WIN2 Signal: network retry
1 1/10/2015 3:16:11 AM WIN1 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:16:11 AM WIN3 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:16:23 AM WIN2 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:16:33 AM WIN3 Signal: network retry
1 1/10/2015 3:16:34 AM WIN1 Signal: network retry
1 1/10/2015 3:16:34 AM WIN2 Signal: network retry
1 1/10/2015 3:16:45 AM WIN2 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:16:47 AM WIN3 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:16:47 AM WIN1 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:17:04 AM WIN3 Signal: network retry
1 1/10/2015 3:17:04 AM WIN1 Signal: network retry
1 1/10/2015 3:17:04 AM WIN2 Signal: network retry
1 1/10/2015 3:17:11 AM WIN3 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:17:11 AM WIN1 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:17:23 AM WIN2 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:17:34 AM WIN3 Signal: network retry
1 1/10/2015 3:17:34 AM WIN2 Signal: network retry
1 1/10/2015 3:17:34 AM WIN1 Signal: network retry
1 1/10/2015 3:17:45 AM WIN1 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:17:47 AM WIN3 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:17:47 AM WIN2 Signal: HTTP: 12002 Timeout
1 1/10/2015 3:18:04 AM WIN3 Signal: network retry
1 1/10/2015 3:18:04 AM WIN2 Signal: network retry
1 1/10/2015 3:18:04 AM WIN1 Signal: network retry
1 1/10/2015 3:18:11 AM WIN3 Signal: HTTP: 12002 Timeout
4 1/10/2015 3:18:11 AM WIN1 Signal: restored
4 1/10/2015 3:18:14 AM WIN2 Signal: restored
1 1/10/2015 3:18:34 AM WIN3 Signal: network retry
4 1/10/2015 3:18:42 AM WIN3 Signal: restored
3 1/10/2015 3:25:03 AM WIN2 MOTION
3 1/10/2015 3:32:29 AM WIN2 MOTION
2 1/10/2015 8:37:54 AM App Restarted after unexpected shutdown

 

[fenderman]

This should not be happening..check the event viewer to see if there is any more info..an alternative to running as a service, you can use blue iris tools to restart the program in the event of a crash as well as get an email..
http://www.ipcamtalk.com/showthread.php?198-Blue-Iris-Tools-Weather-Overlay-Watchdog-amp-more!

 

[FIN13]

Thanks - I have it set up as a service now with auto startup and also an alarm that goes off on my computer if it goes down. There must be a mobile app where I can get into my computer and restart BI if it shuts down and I have an alert pushed to my mobile device - sort of a gotomypc but via my mobile?

 

[fenderman]

Yes, you can use teamviewer...its free and they have a mobile app.

 

[FIN13]

when I run as a service do I choose run as administrator for console or standalone?

 

[fenderman]

I dont understand the question...

 

[FIN13]

Under the startup options is to run as a service. The next option under that tap is require to run as administrator for console or when stand alone. Do I check that off?

 

[fenderman]

Leave it uncheked