UNV IPC3635ER3-DUPZ onvif where to enable? Cannot add to hikvision

M

mitch.gray

n3wb
Apr 28, 2020
18
0
Australia
Hi I have installed 2 x IP3635ER3-DUPZ & Trying to get these cameras to work on my existing Hikvision NVR. I cannot find in the network settings to enable onvif? Can anyone please tell me where to find this so I can work out what port number protcol to make it on the nvr?

cheers
 
mitch.gray said:
Can anyone please tell me where to find this so I can work out what port number protcol to make it on the nvr?
Click to expand...
Query the camera with ONVIF Device Manager from sourceforge.net
Give ODM some logon credentials, top left of the window, and it will find ONVIF devices on the same IP address range automatically.

The 'ONVIF port' can be seen in the URL at the bottom of the Identification page.
And the RTSP string in the 'Live video' page.
And if the camera generates 'ONVIF Events' they can be seen in the Events page.
 
Hi, Thanks so much for the reply. Still couldnt find the port number?
I have tried 80 8000 1000 still nothing
 

Attachments

  • onvif.jpg
    onvif.jpg
    2.3 MB · Views: 82
  • hikvision.jpg
    hikvision.jpg
    1.6 MB · Views: 73
Hi mate. I Have had a look there and it does not show and port number other then the url link? Seems very strange? this is the identification page?

1609641318025.png
 
Last edited:
Thanks so much for the reply. So the Hikvision NVR says unknown error... any thing else I should look for? Settings in the camera I should be looking for?

Cheers
 
mitch.gray said:
Hi mate. I Have had a look there and it does not show and port number other then the url link? Seems very strange? this is the identification page?
Click to expand...
GV-FE2301

It's some OEM GEOVISION based at UNV
Maybe it some customaized with ONVIF OFF. ONLY FOR MONOBRAND?
 
I have the same cam Uniview IPC3635ER3-DUPZ, in the cam menu in security you may have to change the RTSP Authentication from "Digest" to Basic. Also under security Registration Info change it to Off in Hide Vendor Info. HTTP port is 80. Hope that helps.
 
  • Like
Reactions: c hris527 and MC1987
fstfrd50 said:
I have the same cam Uniview IPC3635ER3-DUPZ, in the cam menu in security you may have to change the RTSP Authentication from "Digest" to Basic. Also under security Registration Info change it to Off in Hide Vendor Info. HTTP port is 80. Hope that helps.
Click to expand...
and try password admin for Onvif after changing to basic
 
Correct set user as :admin. I’ll check in the morning I have this UNV cam on a LTS NVR 8ch which is basically a Hikvision. You may have to enter user name and password twice on your NVR to accept the UNV cam. Under protocol: onvif , Username:admin. Port:80


Sent from my iPhone using Tapatalk
 
Hi mate, @fstfrd50 is right.

I have this camera, I just checked on my BI, the ONVIF is on port 80, using the admin account.

FYI, the default RTSP for this camera is on port 554. You can change it from the camera web interface: Setup -> Network -> Port.

1613301079767.png
1613301304180.png
 
  • Like
Reactions: mteky2 and mainetc
Hi I am also having issues with the unv cameras , I'm trying to connect it to my hikvision nvr. I followed all the suggestions that yourll gave but my nvr says network is unreachable. Please help
 
Uniview work via ONVIF only,
Try use Onvif Device Manager (ODM) to check Onvif access to IPC

1.254 is NVR?
IPC address?
 
You must log in or register to reply here.
Top Bottom