fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
4.1.6.1 resolves this issue. Installing this update over a system with this problem will resolve it.
Updating to Blue Iris 4 issue
- Thread starter WalkinPaul
- Start date
I think that's what I loaded yesterday(4.1.6),clean machine and install.I'm making all the usual mistakes.Btw,purchased a used hp 600 from ebay per yoour recommendations fenderman.
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
There is a new update to 4.1.6.1 that was released today..I never tried the prodesk 600 systems, but they should be similar to the elitedesk 800 series, as long as you got the unit with an intel processor you should be good.
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
Did you install the newest update released today 4.1.6.1. Yesterdays release was 6.0. I tested and confirmed that it resolves the problem. There is now a 6.2 release.
http://blueirissoftware.com/updates/
If you are running the demo, you need to manually update.
Dog ate my network cable, had to build a new one.Finally ran update to 4.1.6.1 and auto reboot did not get a warning. Using 4.1.6,I did the registry correction but does not fix the issue.It will show up on reboot.Thanks for the heads up on 4.1.6.1.
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408
Are you saying that you get the same error as op after you reboot the computer? Do you keep disabling the admin?
With 4.1.6 , yes reboot after registry change and the same problem came back. Must be something still checked.The update fixed it. 4.1.6.1 does the trick.
fenderman
Staff member
- Mar 9, 2014
- 36,892
- 21,408