User guide for cam..?

B

baseman

n3wb
Jan 21, 2015
18
0
Hi,

Does anyone have an english manual for the ip cam DS-2CD2132F-IWS? It comes with firmware v5.2.3_141024. Where can I find the latest firmware? The cam is from China. Which region hack do I have to apply?

Thanks in advance..
 
Try this commands via telnet or SSH, if you have Lang=2 or "Chinese", do nothing (no upgrading or downgrading)!

http://www.ipcamtalk.com/showthread.php?2517-Looking-for-Hikvision-5-2-5-or-5-2-8-firmware&p=22286&viewfull=1#post22286
 
Thanks for the help. Which software can I use on a mac to view this cam? I can't use the included mini-dvd.
 
I have bought the ip cam from CCTV Camera China on aliexpress. I modify network parameters with SADP, but using the default admin password 12345, it says "Failed to modify the settings.ID:001"
 
baseman said:
I have bought the ip cam from CCTV Camera China on aliexpress. I modify network parameters with SADP, but using the default admin password 12345, it says "Failed to modify the settings.ID:001"
Click to expand...
You dont need SADP, if the camera is at the default ip address of 192.0.0.64 then connect the camera to your pc or connect both the camera and pc to a switch (nothing else) change the ipv4 settings in the network adapter you are using to 192.0.0.1 and you will be able to access the camera directly..
 
Thanks a lot for the help. I would like to know, if the ip cam can be rotated through pc software?
 
There is a rotate image feature in the camera settings itself.
Configuration> Image> Video adjustment > Rotate
 
baseman said:
That is only the image, and not the lens that rotates?
Click to expand...
On the standard 2132 model its only a two axis camera so the lens does not rotate the way you need it to...
There are other models that are 3axis..as well as a 2132iws that is reportedly a 3 axis..
 
I have the 2132Fiws, and I wanted to know if I could rotate the lens in the dome through a pc software.
 
baseman said:
I have the 2132Fiws, and I wanted to know if I could rotate the lens in the dome through a pc software.
Click to expand...

No you cannot move the camera remotely via software . I think what you are referring to is a PTZ camera that would allow you to follow someone ? You can manually rotate the lense if you take the dome off. I have just done this on exactly that model about 10 mins ago. The 2132f now includes 3'axis movement as opposed to the 2 axis only on the old 2132
 
You must log in or register to reply here.
Top Bottom