Vstarcam C7816WIP with Digoo DG-XME NVR

[nicktenwolde]

Hi guys,

I would like to get this camera working with my NVR.
Now I do not get a connection.
The NVR is for Onvif 2.5 but that must be able to handle a lower one (for example 2.4)?
Or is there an update that my camera (C7816WIP) supports Onvif 2.5?

The NVR is currently in a different location, but it does not work at the location itself either (192.168.2.51).
All ports are open (8124 (web), 554, 10080, 10554. These ports also tried.
I have tried everything but I can not figure it out.

Kind regards,
Nick.

 

[alastairstevenson]

I would like to get this camera working with my NVR.
Now I do not get a connection.

For the ONVIF configuration in the NVR, you need to use the 'ONVIF port' which from your screenshot is 10080.
You can confirm this if you query the camera with ONVIF Device Manager from sourceforge.net
The ONVIF port shows in the URL at the bottom of the Identification page.

but it does not work at the location itself either

If you have customised the ports away from their default values - as seems likely - that could be part of the problem.