Hi all,
I have a VTO4202F-P-S2 with two button and Mifare modules (VTO4202F-MB2 and -MR), a DEE1010B-S1 extra door lock opener which are combined with a VTH5421HW display.
What I want is to be able to open the two doors when presenting one Mifare tag.
When I add a tag, I can 'enable' both locks on the VTH with a sliding button, but the lock that gets opened is dependent on the setting under the VTO web interface: 'Access control' -> 'Local' -> 'Lock'.
It doesn't matter what settings I change under 'RS485'.
I can open both locks flawlessly with the VTH when there is a call incoming and also with DMSS without any problems.
I don't want to make some contraption with a bunch of relays because I still want to be able to just open one lock with my phone.
All the modules are at the current firmware (which I read is to be recommended for Dahua intercoms).
Anyone have an idea as to how to resolve this?
I have a VTO4202F-P-S2 with two button and Mifare modules (VTO4202F-MB2 and -MR), a DEE1010B-S1 extra door lock opener which are combined with a VTH5421HW display.
What I want is to be able to open the two doors when presenting one Mifare tag.
When I add a tag, I can 'enable' both locks on the VTH with a sliding button, but the lock that gets opened is dependent on the setting under the VTO web interface: 'Access control' -> 'Local' -> 'Lock'.
It doesn't matter what settings I change under 'RS485'.
I can open both locks flawlessly with the VTH when there is a call incoming and also with DMSS without any problems.
I don't want to make some contraption with a bunch of relays because I still want to be able to just open one lock with my phone.
All the modules are at the current firmware (which I read is to be recommended for Dahua intercoms).
Anyone have an idea as to how to resolve this?