Which junction box for IPC-HDW5231R-ZE and SD49225T-HN

[steve457]

Ok, so I think I am about to bite the bullet and start moving over the Dahua cameras from my current Hikvision setup.

What junction box would I need for the IPC-HDW5231R-ZE and SD49225T-HN? From the data sheets on Dahua's website I believe I will need PFA137 (for 5231) and PFA120 (for 49225). Can someone please confirm?

The other option I have is to have the conduit go back through the wall and make the connections in the wall instead, but I would rather just order the conduit boxes to have the on hand if needed.

Thanks,
Steve

 

[mat200]

Ok, so I think I am about to bite the bullet and start moving over the Dahua cameras from my current Hikvision setup.

What junction box would I need for the IPC-HDW5231R-ZE and SD49225T-HN? From the data sheets on Dahua's website I believe I will need PFA137 (for 5231) and PFA120 (for 49225). Can someone please confirm?

The other option I have is to have the conduit go back through the wall and make the connections in the wall instead, but I would rather just order the conduit boxes to have the on hand if needed.

Thanks,
Steve

Hi Steve,

IPC-HDW5231R-ZE - PFA137 will work, there is also a new model PFA130E
Dahua has a new water proof junction box PFA130-E / PFA130E for Turrets ( PFA137, PFA139 )

 

[steve457]

Hi Steve,

IPC-HDW5231R-ZE - PFA137 will work, there is also a new model PFA130E
Dahua has a new water proof junction box PFA130-E / PFA130E for Turrets ( PFA137, PFA139 )

Ahh, perfect thanks!

 

[weigle2]

@steve457 - For the SD49225T-HN, you are correct as the PFA120 is the junction box. Pictured below are all the mounting options for this camera.


If you are not able to stuff your cables and connections into a wall or Soffit, then a junction box is essential.

 

[pcunite]

What's the recommendation for mounting in a drop ceiling for something like the SD1A203T-GN?

 

[weigle2]

@pcunite - Right now, these are the only options, unless you get creative. Keep in mind, the base camera can be mounted directly to the ceiling/soffit without any junction boxes or adapters.